JB/T 11233-2012Calibration ring gauge (English PDF)
校准环规
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11233-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 11233-2012 is the English-translated version of 校准环规.
JB/T 11233-2012 is the Chinese machinery industry standard for the calibration ring gauge. It gives the terms and definitions used for the gauge, the types and the dimensions in which it is made, and the requirements it has to satisfy.
It also sets the conditions under which the gauge is tested, the test methods themselves, and the rules for marking and packaging. The gauges it applies to are identified by their diameter d and fall in accuracy classes 1, 2, 3, 4 and 5.
Among the standards it quotes are GB/T 4879-1999, GB/T 5048-1999 and GB/T 17163-2008. The Chinese classification is J42 and the international one 17.040.30.
Found what you need?
Document preview — JB/T 11233-2012
National Standard of the People's Republic of China
- ICS
- 17.040.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11233-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for the calibration ring gauge. It gives the terms and definitions used for the gauge, the types and the dimensions in which it is made, and the requirements it has to satisfy. It also sets the conditions under which the gauge is tested, the test methods themselves, and the rules for marking and packaging. The gauges it applies to are identified by their diameter d and fall in accuracy classes 1, 2, 3, 4 and 5. Among the standards it quotes are GB/T 4879-1999, GB/T 5048-1999 and GB/T 17163-2008. The Chinese classification is J42 and the international one 17.040.30.
JB/T 11233-2012 falls under ICS 17.040.30, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 4879-1999 — Rustproof packaging
GB/T 5048-1999 — Moistureproof packaging
GB/T 17163-2008 — Glossary of terms used in dimensional measuring instruments - General terms
4 Where this standard sits
It cites 3 standards, among them GB/T 4879-1999, GB/T 5048-1999, GB/T 17163-2008, listed in full above.
2 other standards in this catalogue cite it, among them GB/T 6314-2018, JB/T 8604-2012.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 10932-2024 — Screw thread micrometer
GB/T 1218-2018 — Depth micrometer
GB/T 1957-2006 — Tolerances and general features for plain limit gauges
JB/T 15356-2025 — Geometric digital display devices Terminology
JB/T 11243-2012 — Electronic digital display protractor
JB/T 11235-2012 — Tester for dial gauges
7 Classification and status
International classification (ICS): 17.040.30
Chinese Standard Classification (CCS): J 42
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download JB/T 11233-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 11233-2012
$135.00