JB/T 11231-2011Friction drive overhead conveyors (English PDF)
摩擦驱动悬挂输送机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11231-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 11231-2011 is the English-translated version of 摩擦驱动悬挂输送机.
JB/T 11231-2011 is the Chinese machinery industry standard for friction drive overhead conveyors. It sets out the types of conveyor, their basic parameters and the requirements they must meet, together with the test methods and the inspection rules.
Marking, packaging, transport and storage are covered as well. The conveyors it applies to are relay-type suspended friction drive conveyors. Among the standards it quotes are GB/T 528, GB/T 529, GB/T 531.1, GB/T 533, GB/T 706-2008, GB/T 9286-1998, GB/T 11263-2010, GB/T 13306 and GB/T 13384.
The Chinese classification is J81 and the international classification 53.040.10.
Found what you need?
Document preview — JB/T 11231-2011
National Standard of the People's Republic of China
- ICS
- 53.040.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 11231-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
2 Scope
This standard is the Chinese machinery industry standard for friction drive overhead conveyors. It sets out the types of conveyor, their basic parameters and the requirements they must meet, together with the test methods and the inspection rules. Marking, packaging, transport and storage are covered as well. The conveyors it applies to are relay-type suspended friction drive conveyors. Among the standards it quotes are GB/T 528, GB/T 529, GB/T 531.1, GB/T 533, GB/T 706-2008, GB/T 9286-1998, GB/T 11263-2010, GB/T 13306 and GB/T 13384. The Chinese classification is J81 and the international classification 53.040.10.
3 Normative references
JB/T 11231-2011 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 528
GB/T 529
GB/T 531.1
GB/T 533
GB/T 706-2008
GB/T 9286-1998
GB/T 11263-2010
GB/T 13306
GB/T 13384
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Classification and status
International classification (ICS): 53.040.10
Chinese Standard Classification (CCS): J 81
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 529Rubber, vulcanized or thermoplastic -- Determination of tear strength (Trouser, angle and crescent test pieces)
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 533Rubber, vulcanized or thermoplastic -- Determination of density
- GB/T 706-2008Hot rolled section steel
- GB/T 9286-1998Paints and varnishes - Cross-cut test
How to Download JB/T 11231-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
Secure payment via Stripe
Payments accepted
JB/T 11231-2011
$135.00