JB/T 11211-2011Motorized switching valves for small refrigeration systems (English PDF)
小型制冷系统用电动切换阀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11211-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 11211-2011 is the English-translated version of 小型制冷系统用电动切换阀.
JB/T 11211-2011 is a recommended Chinese machinery industry standard for the motor-driven switching valve used in small refrigeration systems.
It fixes the terminology and definitions, the types, the models and the conditions of use of the valve, and then its requirements, the test methods and the inspection rules, with signs, packaging, transportation and storage at the end.
It applies to systems charged with R600a, R134a or a refrigerant of similar thermodynamic properties, for electric switching valves whose diameter is not greater than 1.0 mm.
Chinese classification J73 and international classification 27.200 are recorded. It quotes GB/T 191, GB/T 2423.17 and GB/T 2828.1.
Found what you need?
Document preview — JB/T 11211-2011
National Standard of the People's Republic of China
- ICS
- 27.200
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11211-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the motor-driven switching valve used in small refrigeration systems. It fixes the terminology and definitions, the types, the models and the conditions of use of the valve, and then its requirements, the test methods and the inspection rules, with signs, packaging, transportation and storage at the end. It applies to systems charged with R600a, R134a or a refrigerant of similar thermodynamic properties, for electric switching valves whose diameter is not greater than 1.0 mm. Chinese classification J73 and international classification 27.200 are recorded. It quotes GB/T 191, GB/T 2423.17 and GB/T 2828.1.
JB/T 11211-2011 falls under ICS 27.200, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 2423.17
GB/T 2828.1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 12839-2016 — Integrated water chilling (heat pump) packages
GB/T 10870-2014 — The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle
SB/T 10794.2-2012 — Commercial refrigerated cabinets - Part 2: Classification, requirements and test condition
JB/T 11213-2022 — Liquid-line filters and liquid-line filter-driers for refrigeration and air conditioning systems
JB/T 11212-2011 — Suction-line filters and suction-line filter-driers for refrigeration and air conditioning systems
JB/T 11210-2011 — Gas-liquid separators for refrigeration and air conditioning systems
6 Classification and status
International classification (ICS): 27.200
Chinese Standard Classification (CCS): J 73
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2423.17Environmental testing - Part 2: Test methods - Test Ka: Salt mist
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Similar standards
How to Download JB/T 11211-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
JB/T 11211-2011
$225.00