Valid

JB/T 11210-2011Gas-liquid separators for refrigeration and air conditioning systems (English PDF)

制冷空调系统用气液分离器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11210-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 15, 2011

Implementation date

November 1, 2011

Scope

JB/T 11210-2011 is the English-translated version of 制冷空调系统用气液分离器.

JB/T 11210-2011 is a recommended Chinese machinery industry standard for the gas-liquid separator used in refrigeration and air conditioning systems. It establishes the terminology and definitions, the classification and models, the requirements, the test methods and the inspection rules, and it covers signs, packaging, transport and storage.

It applies to separators working with liquefied refrigerant of safety class A1 or A1/A1 in vapour compression refrigeration and air conditioning cycles, with a design pressure of no more than 2.51 MPa and a capacity of no more than 25 L; a limit on the design temperature is set as well.

The document carries Chinese classification J73 and international classification 27.200. Among the standards it quotes are GB/T 1733, GB/T 9286, GB/T 10125 and NB/T 47012-2010.

Found what you need?

Document preview — JB/T 11210-2011

National Standard of the People's Republic of China

ICS
27.200

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11210-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for the gas-liquid separator used in refrigeration and air conditioning systems. It establishes the terminology and definitions, the classification and models, the requirements, the test methods and the inspection rules, and it covers signs, packaging, transport and storage. It applies to separators working with liquefied refrigerant of safety class A1 or A1/A1 in vapour compression refrigeration and air conditioning cycles, with a design pressure of no more than 2.51 MPa and a capacity of no more than 25 L; a limit on the design temperature is set as well. The document carries Chinese classification J73 and international classification 27.200. Among the standards it quotes are GB/T 1733, GB/T 9286, GB/T 10125 and NB/T 47012-2010.

JB/T 11210-2011 falls under ICS 27.200, in the field of energy and heat transfer engineering.

This catalogue holds 276 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 1733

GB/T 2828.1

GB/T 9286

GB/T 10125

NB/T 47012-2010 — Pressure vessels for refrigerant equipment

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

JB/T 12839-2016 — Integrated water chilling (heat pump) packages

GB/T 10870-2014 — The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle

SB/T 10794.2-2012 — Commercial refrigerated cabinets - Part 2: Classification, requirements and test condition

JB/T 11213-2022 — Liquid-line filters and liquid-line filter-driers for refrigeration and air conditioning systems

JB/T 11212-2011 — Suction-line filters and suction-line filter-driers for refrigeration and air conditioning systems

JB/T 11211-2011 — Motorized switching valves for small refrigeration systems

6 Classification and status

International classification (ICS): 27.200

Chinese Standard Classification (CCS): J 73

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11210-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11210-2011

$195.00