JB/T 11155-2011AC/DC universal motors for circuit-breakers - Technical requirements (English PDF)
断路器专用交直流两用电动机 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11155-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 11155-2011 is the English-translated version of 断路器专用交直流两用电动机 技术条件.
JB/T 11155-2011 is a recommended Chinese machinery industry standard setting the technical requirements for the AC and DC motors built specifically for circuit-breakers.
It gives the motor models, the basic parameters and dimensions, the technical requirements, the test methods and the inspection rules, and covers signs, packaging, transport and storage.
It applies to the HDZ series AC, DC and AC/DC motors of low, medium and high voltage circuit-breakers, which through a gear box drive the operating mechanism of the breaker or charge a spring operating mechanism for remote control.
The standard adds that breakers driven by a permanent magnet DC motor may refer to it. Among the standards it quotes are GB/T 2423.4-2008, GB/T 5171-2002, GB/T 12351-2008 and GB/T 22719.2-2008.
Found what you need?
Document preview — JB/T 11155-2011
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11155-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard setting the technical requirements for the AC and DC motors built specifically for circuit-breakers. It gives the motor models, the basic parameters and dimensions, the technical requirements, the test methods and the inspection rules, and covers signs, packaging, transport and storage. It applies to the HDZ series AC, DC and AC/DC motors of low, medium and high voltage circuit-breakers, which through a gear box drive the operating mechanism of the breaker or charge a spring operating mechanism for remote control. The standard adds that breakers driven by a permanent magnet DC motor may refer to it. Among the standards it quotes are GB/T 2423.4-2008, GB/T 5171-2002, GB/T 12351-2008 and GB/T 22719.2-2008.
JB/T 11155-2011 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 2829
GB/T 4857.5
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 5171-2002 — General technical conditions of small power motors
GB/T 8128 - 2008 — Test procedures for single-phase series motors
GB/T 10069.1
GB 12350-2009 — Safety requirements of small-power motors
GB/T 12351-2008 — Environmental technical requirements of rotating electric machines for tropical use
GB/T 12665
GB/T 22719.2-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 2: Test limits
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 39553-2020 — General specification for DC servo motors
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
JB/T 15025-2025 — AC motors for electric actuators
JB/T 15024-2025 — Brushless DC motor for electric compact shelving
JB/T 11703-2025 — Technical specifications for brushless DC motors for air conditioner fans
6 Classification and status
International classification (ICS): 29.160.30
Chinese Standard Classification (CCS): K 24
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 2423.4-2008Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 4857.5Packaging-Transport packages-Vertical impact test method by dropping
- GB/T 4942.1-2006Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Similar standards
How to Download JB/T 11155-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12350-2009 — Safety requirements of small-power motors
GB/T 10069.1-1988 — Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
JB/T 11155-2011
$165.00