JB/T 11144-2011X-ray diffractometer (English PDF)
X射线衍射仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11144-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 11144-2011 is the English-translated version of X射线衍射仪.
JB/T 11144-2011 is a recommended Chinese machinery industry standard for the X-ray diffractometer. It gives the terms and definitions used for the instrument, the classification of the products, the technical requirements, the inspection rules, the test methods, and the rules for marking, packaging, transport and storage.
The instruments it applies to are multi-crystal X-ray diffractometers, identified by the structure of their goniometer. Among the standards it quotes are GB/T 1184, GB/T 2829, GB/T 13384 and JB/T 9329-1999.
The Ministry of Industry and Information Technology issued it. The Chinese classification of the document is N33 and its international classification 17.180.99.
Found what you need?
Document preview — JB/T 11144-2011
National Standard of the People's Republic of China
- ICS
- 17.180.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11144-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the X-ray diffractometer. It gives the terms and definitions used for the instrument, the classification of the products, the technical requirements, the inspection rules, the test methods, and the rules for marking, packaging, transport and storage. The instruments it applies to are multi-crystal X-ray diffractometers, identified by the structure of their goniometer. Among the standards it quotes are GB/T 1184, GB/T 2829, GB/T 13384 and JB/T 9329-1999. The Ministry of Industry and Information Technology issued it. The Chinese classification of the document is N33 and its international classification 17.180.99.
JB/T 11144-2011 falls under ICS 17.180.99, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1184
GB/T 2829
GB/T 13384
JB/T 9329-1999 — Instruments - Basic environmental conditions and test methods for transportation and storage
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 17341-1998 — [GB/T 17341-1998] Optics and optical instruments. Focimeters
JB/T 7403-1994 — Illuminance meters
JB/T 13872-2020 — Phase-shifting interferometers for flat surfaces
JB/T 11610-2013 — Non-destructive testing instrument - Specifications for digital ultrasonic testing instruments
JB/T 11145-2011 — X-ray fluorescence spectrometer
6 Classification and status
International classification (ICS): 17.180.99
Chinese Standard Classification (CCS): N 33
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 13384General specifications for packing of mechanical and electrical product
- JB/T 9329-1999Instruments - Basic environmental conditions and test methods for transportation and storage
Similar standards
How to Download JB/T 11144-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
JB/T 11144-2011
$105.00