JB/T 11032-2010Specification of compressor disk stainless steel forging for gas turbine (English PDF)
燃气轮机压气机轮盘不锈钢锻件 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11032-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 11032-2010 is the English-translated version of 燃气轮机压气机轮盘不锈钢锻件 技术条件.
JB/T 11032-2010 is a recommended Chinese machinery industry standard covering the stainless steel forgings of gas turbine compressor disks. For these forgings it fixes the ordering requirements, the manufacturing processes, the technical requirements, the test rules and test methods, the inspection and the quality certification.
The standard applies to the ordering, the manufacture and the testing of stainless steel forgings for the compressor wheels of gas turbines. It is classified J32 in the Chinese system, with international classification 77.140.85. Among the standards it quotes are GB/T 223.7, GB/T 223.22 and GB/T 223.36.
Found what you need?
Document preview — JB/T 11032-2010
National Standard of the People's Republic of China
- ICS
- 77.140.85
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11032-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard covering the stainless steel forgings of gas turbine compressor disks. For these forgings it fixes the ordering requirements, the manufacturing processes, the technical requirements, the test rules and test methods, the inspection and the quality certification. The standard applies to the ordering, the manufacture and the testing of stainless steel forgings for the compressor wheels of gas turbines. It is classified J32 in the Chinese system, with international classification 77.140.85. Among the standards it quotes are GB/T 223.7, GB/T 223.22 and GB/T 223.36.
JB/T 11032-2010 falls under ICS 77.140.85, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 223.1
GB/T 223.2
GB/T 223.3
GB/T 223.4
GB/T 223.5
GB/T 223.6
GB/T 223.7
GB/T 223.8
GB/T 223.9
GB/T 223.10
GB/T 223.11
GB/T 223.12
GB/T 223.13
GB/T 223.14
GB/T 223.15
GB/T 223.16
GB/T 223.17
GB/T 223.18
GB/T 223.19
GB/T 223.20
GB/T 223.21
GB/T 223.22
GB/T 223.23
GB/T 223.24
GB/T 223.25
GB/T 223.26
GB/T 223.27
GB/T 223.28
GB/T 223.29
GB/T 223.30
GB/T 223.31
GB/T 223.32
GB/T 223.33
GB/T 223.34
GB/T 223.35
GB/T 223.36
GB/T 223.37
GB/T 223.38
GB/T 223.39
GB/T 223.40
GB/T 223.41
GB/T 223.42
GB/T 223.43
GB/T 223.44
GB/T 223.45
GB/T 223.46
GB/T 223.47
GB/T 223.48
GB/T 223.49
GB/T 223.50
GB/T 223.51
GB/T 223.52
GB/T 223.53
GB/T 223.54
GB/T 223.55
GB/T 223.56
GB/T 223.57
GB/T 223.58
GB/T 223.59
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 6401-2017 — Steels for large roll forgings - Technical requirements
GB/T 12362-2016 — Steel die forgings - Tolerance and machining allowance
GB/T 12361-2016 — Steel die forgings - General specification
JB/T 11024-2025 — Welded rotor forgings for steam turbines of large nuclear power units - Technical specification
JB/T 11030-2021 — High and low pressure combined rotor forgings for steam turbines - Technical requirements
JB/T 11026-2010 — Specification of rotor forgings for four-pole turbine generators of large nuclear power units
6 Classification and status
International classification (ICS): 77.140.85
Chinese Standard Classification (CCS): J 32
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 223.1Determination of carbon content in iron, steel and alloy
- GB/T 223.2Determination of sulphur content in iron, steel and alloy
- GB/T 223.3Iron, steel and alloy - Determination of phosphorus content - Spectrophotometric method, titrimetric method and gravimetric method
- GB/T 223.4Alloyed steel - Determination of manganese content - Potentiometric or visual titration method
- GB/T 223.5Steel and iron -- Determination of acid-soluble silicon and total silicon content -- Reduced molybdosilicate spectrophotometric method
- GB/T 223.6Iron, steel and alloy - Determination of boron content - Neutralization titrimetric method and spectrophotometric method
GB/T 223.39 · GB/T 223.44
Similar standards
How to Download JB/T 11032-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 223.1-1981 — Determination of carbon content in iron, steel and alloy
GB/T 223.10-1991 — Methods for chemical analysis of iron, steel and alloy--The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
GB/T 223.10-2000 — Methods for chemical analysis of iron, steel and alloy - The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
JB/T 11032-2010
$105.00