JB/T 11018-2010Cr10 stainless steel castings for supercritical and ultra-supercritical steam turbines - Technical requirements (English PDF)
超临界及超超临界机组汽轮机用Cr10型不锈钢铸件 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11018-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 11018-2010 is the English-translated version of 超临界及超超临界机组汽轮机用Cr10型不锈钢铸件 技术条件.
JB/T 11018-2010 is the Chinese machinery industry standard covering cr10 stainless steel castings for supercritical and ultra-supercritical steam turbines - Technical requirements.
It was issued on 11 February 2010 and has been in force since 1 July 2010, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2010 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 11018-2010
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Order requirements
- 4 Manufacturing process
- 4.1 Melting
- 4.2 Casting
- 4.3 Heat treatment
- 4.4 Defect removal and repair welding
- 5 Technical requirements
- 5.1 Chemical composition
- 5.2 Mechanical properties
- 5.3 Microstructure
- 5.4 Surface quality
- 5.5 Non-destructive testing
- 5.6 Shape and dimensional tolerances
- 5.7 Weight tolerance
- 6 Test methods and inspection rules
- 6.1 Chemical composition analysis
- 6.2 Mechanical property test
- 6.3 Inspection of the surface quality
- 6.4 Non-destructive testing
- 6.5 Retest and re-heat treatment
- 7 Acceptance and quality certificate
- 7.1 Acceptance
- 7.2 Quality certificate
- 8 Identification and packaging
- Annex A (normative) Supplementary requirements on the mechanical properties
- A.1 High temperature stress rupture test
- A.2 High temperature tensile test
- Table 1 Heat treatment schedule of the castings (recommended)
- Table 2 Chemical composition (mass fraction)
- Table 3 Permissible deviations of the chemical composition of the finished product (mass fraction)
- Table 4 Gas content (volume fraction)
- Table 5 Mechanical properties
- Table A.1 Conditions of the high temperature stress rupture test
- Table A.2 Conditions of the high temperature tensile test
What this standard covers
This standard specifies the ordering requirements, manufacturing process, and technical requirements for Cr10 stainless steel castings used in supercritical and ultra-supercritical turbine units, describes the corresponding test methods, and specifies inspection rules, quality certificates, marking, and packaging. This standard applies to the manufacture of castings such as cylinder blocks, valve bodies, valve covers, and bends produced by sand casting methods for supercritical and ultra-supercritical turbine units.
Document data
International classification (ICS): 77.140.80.
Chinese classification (CCS): J31.
3 Order requirements
4 Manufacturing process
5 Technical requirements
6 Test methods and inspection rules
7 Acceptance and quality certificate
8 Identification and packaging
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 11018-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 11018-2010
$135.00