JB/T 11005-2010Dry vibrating magnetic separators (English PDF)
干式振动磁选机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11005-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 11005-2010 is the English-translated version of 干式振动磁选机.
JB/T 11005-2010 is a recommended Chinese machinery industry standard for the dry vibrating magnetic separator. It gives the types of separator and their basic parameters, the technical requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.
The duty named for the machine is the removal of non-magnetic particles and other matter mixed into ferromagnetic powder material, and it is the dry vibrating construction that the standard addresses.
Among the standards it quotes are GB/T 191, GB/T 3768, GB/T 6388, GB/T 9969, GB/T 13306, GB/T 13384 and JB/T 6570. In the classification schemes the document carries D96 and 73.120.
Found what you need?
Document preview — JB/T 11005-2010
National Standard of the People's Republic of China
- ICS
- 73.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11005-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the dry vibrating magnetic separator. It gives the types of separator and their basic parameters, the technical requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. The duty named for the machine is the removal of non-magnetic particles and other matter mixed into ferromagnetic powder material, and it is the dry vibrating construction that the standard addresses. Among the standards it quotes are GB/T 191, GB/T 3768, GB/T 6388, GB/T 9969, GB/T 13306, GB/T 13384 and JB/T 6570. In the classification schemes the document carries D96 and 73.120.
JB/T 11005-2010 falls under ICS 73.120, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 3768
GB/T 6388
GB/T 9969
GB/T 13306
GB/T 13384
JB/T 6570
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
GB/T 10605-2015 — Center driving rotary-rake thickener
JB/T 10884-2025 — Peripheral-transmission automatic segmented harrow thickener
JB/T 11004-2010 — Hydraulic centre-drive thickeners
JB/T 10998-2010 — Permanent magnetic drum separator for coal
6 Classification and status
International classification (ICS): 73.120
Chinese Standard Classification (CCS): D 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 6388Transport package shipping mark
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
Similar standards
How to Download JB/T 11005-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 11005-2010
$105.00