JB/T 10994-2010Plastic liners for drum mine hoists (English PDF)
缠绕式矿井提升设备用塑料衬板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10994-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 10994-2010 is the English-translated version of 缠绕式矿井提升设备用塑料衬板.
JB/T 10994-2010 is a recommended Chinese machinery industry standard for the plastic liners of drum type mine hoisting equipment. It fixes the models and specifications of such liners, the technical requirements, the test methods, the inspection rules and the documents supplied with the product on delivery.
The liners it covers are those of winding mine hoisting equipment, used chiefly on the single rope winding drum and spindle assemblies of hoists in coal, metallurgy and mining, and on comparable rope winding drum machinery.
Among the standards it quotes are GB/T 1041, GB/T 1043.1, GB/T 1689, GB/T 2411, GB/T 9341, GB/T 14486 and MT 113. Its codes are D93 and 73.100.40.
Found what you need?
Document preview — JB/T 10994-2010
National Standard of the People's Republic of China
- ICS
- 73.100.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10994-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the plastic liners of drum type mine hoisting equipment. It fixes the models and specifications of such liners, the technical requirements, the test methods, the inspection rules and the documents supplied with the product on delivery. The liners it covers are those of winding mine hoisting equipment, used chiefly on the single rope winding drum and spindle assemblies of hoists in coal, metallurgy and mining, and on comparable rope winding drum machinery. Among the standards it quotes are GB/T 1041, GB/T 1043.1, GB/T 1689, GB/T 2411, GB/T 9341, GB/T 14486 and MT 113. Its codes are D93 and 73.100.40.
JB/T 10994-2010 falls under ICS 73.100.40, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1041
GB/T 1043.1
GB/T 1689
GB/T 2411
GB/T 9341
GB/T 14486
MT 113
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
MT/T 716-2019 — Technical delivery requirements of steel wire ropes for coal mine hoisting
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 14596-2025 — Guide trough for mining belt conveyor
JB/T 14594-2025 — Underground mining blasting equipment transport vehicle
JB/T 10995-2010 — Liners for head sheaves and deflection sheaves of mine hoists
6 Classification and status
International classification (ICS): 73.100.40
Chinese Standard Classification (CCS): D 93
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1041Plastics -- Determination of compressive properties
- GB/T 1043.1Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
- GB/T 1689Rubber vulcanized-Determination of abrasion resistance (Akron machine)
- GB/T 2411Plastics and ebonite -- Determination of indentation hardness by means of a durometer (shore hardness)
- GB/T 9341Plastics -- Determination of flexural properties
- GB/T 14486Dimensional tolerances for moulded plastic parts
Similar standards
How to Download JB/T 10994-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1041-1992 — Plastics--Determination of compressive properties
GB/T 1041-2008 — Plastics -- Determination of compressive properties
GB/T 1043.1-2008 — Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
JB/T 10994-2010
$105.00