JB/T 10957-2010Quick couplings for internal combustion engines (English PDF)
内燃机用快速接头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10957-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 10957-2010 is the English-translated version of 内燃机用快速接头.
JB/T 10957-2010 is a recommended Chinese machinery industry standard for quick couplings used on internal combustion engines. It specifies the models and types of coupling, the technical requirements, the test methods, the inspection, and the provisions for marking, packaging, transportation and storage.
The couplings covered carry fluids including petrol, diesel fuel, water and air during the manufacture and testing of internal combustion engines. The requirements are written for fittings of stainless steel and brass, while fittings made of other materials may also take the standard as a reference.
Among the standards it quotes are GB/T 308-2002, GB/T 1220-2007, GB/T 5231-2001, GB/T 7306.1-2000, HG/T 2021-1991 and HG/T 2811-1996. Its classification codes are J90 and 27.020.
Found what you need?
Document preview — JB/T 10957-2010
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10957-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for quick couplings used on internal combustion engines. It specifies the models and types of coupling, the technical requirements, the test methods, the inspection, and the provisions for marking, packaging, transportation and storage. The couplings covered carry fluids including petrol, diesel fuel, water and air during the manufacture and testing of internal combustion engines. The requirements are written for fittings of stainless steel and brass, while fittings made of other materials may also take the standard as a reference. Among the standards it quotes are GB/T 308-2002, GB/T 1220-2007, GB/T 5231-2001, GB/T 7306.1-2000, HG/T 2021-1991 and HG/T 2811-1996. Its classification codes are J90 and 27.020.
JB/T 10957-2010 falls under ICS 27.020, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 308-2002 — Rolling bearings - Steel balls
GB/T 1220-2007 — Stainless steel bars
GB/T 1222-2007 — Spring steels
GB/T 5231-2001 — Wrought copper and copper alloys chemical composition limits and forms of wrought products
GB/T 7306.1-2000 — Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 1: Parallel internal and taper external threads
GB/T 7306.2-2000 — Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 2: Taper internal and external threads
HG/T 2021-1991 — High temperature resistant oil O shape rubber seal ring materials
HG/T 2811-1996 — Rubber Materials of Rotary Shaft Lip Seals
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7184-2023 — Reciprocating internal combustion engines - Evaluation method of vibration
JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors
JB/T 6729-2007 — Internal combustion engines - Magnetic particle testing of crankshafts and camshafts
JB/T 14795-2024 — Requirements for prohibited substances on internal combustion engines
JB/T 14238-2023 — Technical specification for green design product assessment - Diesel engine
JB/T 13720-2019 — Diesel engines - Full speed and over load test methods
6 Classification and status
International classification (ICS): 27.020
Chinese Standard Classification (CCS): J 90
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 308-2002Rolling bearings - Steel balls
- GB/T 1220-2007Stainless steel bars
- GB/T 1222-2007Spring Steels
- GB/T 5231-2001Designation and chemical composition of wrought copper and copper alloys
- GB/T 7306.1-2000Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 1: Parallel internal and taper external threads
- GB/T 7306.2-2000Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 2: Taper internal and external threads
Similar standards
How to Download JB/T 10957-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 10957-2010
$165.00