JB/T 10920-2008Limestone injection into furnace and activation of unreacted calcium desulfurization units (English PDF)
炉内喷钙尾部增湿活化脱硫装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10920-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 16, 2008
Implementation date
December 6, 2008
Scope
JB/T 10920-2008 is the English-translated version of 炉内喷钙尾部增湿活化脱硫装置.
JB/T 10920-2008 is a recommended Chinese machinery industry standard on desulfurization plant that injects limestone into the furnace and then activates the unreacted calcium.
It defines its own scope and the terms it uses, and goes on to technical requirements, inspection, and operation and maintenance.
The plant it applies to serves small and medium-sized boilers burning low-sulfur coal, with limestone injected into the furnace and a humidifier at the tail activating the calcium that has not reacted, and it adds that other similar desulfurization units may use it for reference.
Among the standards it quotes are GB 50205, GB 50254, JB/T 4735, DL/T 5047 and DL/T 5196. Its Chinese classification code is J88 and its international classification is 13.030.40.
Found what you need?
Document preview — JB/T 10920-2008
National Standard of the People's Republic of China
- ICS
- 13.030.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10920-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 June 2008 and has been in force since 6 December 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on desulfurization plant that injects limestone into the furnace and then activates the unreacted calcium. It defines its own scope and the terms it uses, and goes on to technical requirements, inspection, and operation and maintenance. The plant it applies to serves small and medium-sized boilers burning low-sulfur coal, with limestone injected into the furnace and a humidifier at the tail activating the calcium that has not reacted, and it adds that other similar desulfurization units may use it for reference. Among the standards it quotes are GB 50205, GB 50254, JB/T 4735, DL/T 5047 and DL/T 5196. Its Chinese classification code is J88 and its international classification is 13.030.40.
JB/T 10920-2008 falls under ICS 13.030.40, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 50128-2005 — Code for construction and acceptance of vertical cylindrical steel welded storage tanks
GB 50205-2001 — Code for Acceptance of Construction quality of Steel Structures
GB 50254-1996 — Code for construction and acceptance of cow-voltage apparatus electric equipment installation engineering
GB 50255-1996 — Code for construction and acceptance of power convertor equipment electric equipment installation engineering
GB 50256-1996 — Code for construction and acceptance of electric device of crane electrical equipment installation engineering
GB 50257-1996 — Code for construction and acceptance of electric device for explosion atmospheres and fire hazard electrical equipment installation engineering
GB 50258-1996 — Code for construction and acception of 1kV and under feeder cable engineering electric equipment installation engineering
GB 50259-1996 — Code for Construction and Acception of Electric Lighting Device Electric Equipment Installation Engineering
JB/T 4735-1997 — Steel welded atmospheric pressure vessels
DL 5007-1992
DL 5031-1994
DL/T 5047-1995
DL/T 5190.5-2004 — Technical specification for thermal power erection and construction. Part 5: Piping and system
DL/T 5196
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11391-2025 — Installation technical requirements and acceptance specifications for filter bags for bag filters
JB/T 10919-2023 — Flue gas desulphurization & dust removal integrated device
JB/T 10921-2008 — Bag filters for coal-fired boiler flue gas
6 Classification and status
International classification (ICS): 13.030.40
Chinese Standard Classification (CCS): J 88
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 50128-2005Code for construction and acceptance of vertical cylindrical steel welded storage tanks
- GB 50205-2001Standard for acceptance of construction quality of steel structures
- GB 50254-1996Code for construction and acceptance of low-voltage apparatus electric equipment installation engineering
- GB 50255-1996Code for construction and acceptance of power conversion equipment electric equipment installation engineering
- GB 50256-1996Code for construction and acceptance of electric device of crane electrical equipment installation engineering
- GB 50257-1996Code for construction and acceptance of electric device for explosion atmospheres and fire hazard electrical equipment installation engineering
DL 5007-1992 · DL 5031-1994 · DL/T 5047-1995
Similar standards
How to Download JB/T 10920-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 5190.5-2004 — Technical specification for thermal power erection and construction. Part 5: Piping and system
DL/T 5196-2004 — Technical code for designing flue gas desulfurization plants of fossil fuel power plants
DL/T 5196-2016 — Code for design of limestone - gypsum wet flue gas desulfurization system in thermal power plant
JB/T 10920-2008
$135.00