Valid

JB/T 10912-2008Water-cooled liningless cupolas (English PDF)

水冷无炉衬冲天炉

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10912-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 10912-2008 is the English-translated version of 水冷无炉衬冲天炉.

The water-cooled liningless cupola is the subject of JB/T 10912-2008, a recommended standard of the Chinese machinery industry. For furnaces of this kind used to produce cast iron it fixes the basic parameters, the technical requirements, the test methods and the inspection rules, and goes on to marking, packaging, transport and storage.

Its field of application is the coke-fired water-cooled liningless cupola with a melting rate from 5 t/h to 50 t/h, called the cupola throughout the text. Among the standards it quotes are GB/T 985.1, GB/T 3323, GB/T 13306, JB/T 1644 and JB/T 9875.

The catalogue assigns it the Chinese classification code J61 and names the Ministry of Industry and Information Technology as the issuing agency.

Found what you need?

Document preview — JB/T 10912-2008

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 10912-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

The water-cooled liningless cupola is the subject of JB/T 10912-2008, a recommended standard of the Chinese machinery industry. For furnaces of this kind used to produce cast iron it fixes the basic parameters, the technical requirements, the test methods and the inspection rules, and goes on to marking, packaging, transport and storage. Its field of application is the coke-fired water-cooled liningless cupola with a melting rate from 5 t/h to 50 t/h, called the cupola throughout the text. Among the standards it quotes are GB/T 985.1, GB/T 3323, GB/T 13306, JB/T 1644 and JB/T 9875. The catalogue assigns it the Chinese classification code J61 and names the Ministry of Industry and Information Technology as the issuing agency.

JB/T 10912-2008 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB/T 191

GB/T 985.1

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 3323-2005 — Radiographic examination of fusion welded joints in metallic materials

GB/T 5226.1

GB/T 13306

JB/T 1644-2005 — Foundry machinery - General technical requirements

JB/T 3000

JB/T 6331.2

JB/T 9875

JB 10146

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 37365-2019 — Die casting unit—Performance testing method

GB/T 21269-2018 — Cold chamber die casting machines

JB/T 12243-2015 — Die-casting unit - Safety signs

JB/T 11182-2026 — Transitional charging skip

JB/T 11181-2026 — Top spraying dust collector of cupola - Technical specifications

JB/T 10914-2021 — Shakeout machines - Reliability test methods

6 Classification and status

Chinese Standard Classification (CCS): J 61

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 10912-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10912-2008

$105.00