JB/T 10886-2008Flameproof permanent magnet tramp iron separators (English PDF)
隔爆型永磁除铁器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10886-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10886-2008 is the English-translated version of 隔爆型永磁除铁器.
Flameproof permanent magnet tramp iron separators are covered by JB/T 10886-2008, a recommended standard of the Chinese machinery industry. The standard gives the product classification, the technical requirements, the test methods and the inspection rules, and then marking, packaging, transport and storage.
It applies to flameproof permanent magnet separators, machines intended for places where explosive gas may be present, which work with a belt conveyor and separate ferromagnetic material from bulk non magnetic material.
Among the standards it quotes are GB 3836.1, GB 3836.2, GB/T 13560, JB/T 4262-1992 and MT/T 914. The Chinese standard classification code recorded for the document is D96.
Found what you need?
Document preview — JB/T 10886-2008
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10886-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Flameproof permanent magnet tramp iron separators are covered by JB/T 10886-2008, a recommended standard of the Chinese machinery industry. The standard gives the product classification, the technical requirements, the test methods and the inspection rules, and then marking, packaging, transport and storage. It applies to flameproof permanent magnet separators, machines intended for places where explosive gas may be present, which work with a belt conveyor and separate ferromagnetic material from bulk non magnetic material. Among the standards it quotes are GB 3836.1, GB 3836.2, GB/T 13560, JB/T 4262-1992 and MT/T 914. The Chinese standard classification code recorded for the document is D96.
JB/T 10886-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 197-2003 — General purpose metric screw threads – Tolerances
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 2423.4
GB/T 3768
GB 3836.1
GB 3836.2
GB/T 6388
GB 9969.1
GB/T 13306
GB/T 13384
GB/T 13560
JB/T 4262-1992 — Rubber sheathed cable entry devices for explosion-proof electrical apparatus
JB/T 9593.1
MT/T 914
SJ/T 10410
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
GB/T 10605-2015 — Center driving rotary-rake thickener
JB/T 14600-2025 — Coal water slurry equipment - Propeller agitator
JB/T 10884-2025 — Peripheral-transmission automatic segmented harrow thickener
JB/T 10885-2008 — Continuous tramp iron separators for magnetic ores
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 197-2003General purpose metric screw threads -- Tolerances
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2423.4Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB 3836.1[Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
Similar standards
How to Download JB/T 10886-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 3836.1-1983 — Electrical apparatus for explosive atmosphere--General requirements
GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
GB 3836.1-2010 — [Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
JB/T 10886-2008
$105.00