JB/T 10883-2019Fixed-shaft multi-cylinder hydraulic cone crushers (English PDF)
定轴式多缸液压圆锥破碎机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10883-2019 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 2, 2019
Implementation date
January 1, 2020
Scope
JB/T 10883-2019 is the English-translated version of 定轴式多缸液压圆锥破碎机.
JB/T 10883-2019 is the Chinese machinery industry standard covering fixed-shaft multi-cylinder hydraulic cone crushers. It was issued on 2 May 2019 and has been in force since 1 January 2020, replacing JB/T 10883-2008.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2019 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10883-2019
National Standard of the People's Republic of China
- Replacing
- JB/T 10883-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Type and basic parameters
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Requirements on the appearance quality
- 4.3 Quality requirements for the main parts and components
- 4.4 Assembly requirements
- 4.5 Safety requirements
- 4.6 Requirements of the no-load test
- 4.7 Requirements of the load test
- 4.8 Completeness of the set
- 5 Test methods
- 5.1 General tests
- 5.2 No-load test
- 5.3 Load test
- 6 Inspection rules
- 6.1 Classification of inspection
- 6.2 Factory inspection
- 6.3 Type inspection
- 7 Marking, packaging, transport and storage
- Figure 1 Construction of the crusher
- Table 1 Basic parameters
- Table 2 Mechanical properties of the main parts and components
- Table 3 Gear meshing backlash
Document data
Chinese classification (CCS): D94.
Estimated length of the Chinese original: 11,119 words.
Supersedes the earlier edition JB/T 10883-2008.
3 Type and basic parameters
4 Technical requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transport and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 10883
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10883-2019 | Fixed-shaft multi-cylinder hydraulic cone crushers | current edition | Current |
| JB/T 10883-2008 | Fixed-shaft multi-cylinder hydraulic cone crushers | previous edition | Superseded |
This page sells the current edition, JB/T 10883-2019. Earlier editions are listed for reference only.
How to Download JB/T 10883-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 10883-2019
$150.00