JB/T 10879-2008Circular vibrating screens for hot materials (English PDF)
温热物料用圆振动筛
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10879-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10879-2008 is the English-translated version of 温热物料用圆振动筛.
JB/T 10879-2008 is a recommended Chinese machinery industry standard for the circular vibrating screens used on hot materials. It gives the product classification, the technical requirements, the test methods and the inspection rules, and then marking, labels, instructions for use, packaging, transport and storage.
The screens within its field are circular vibrating screens for warm material, machines employed above all in road construction, in coking and in similar industries, where they classify loose material of small particle size by size while the material is still warm.
Among the standards it quotes are GB/T 713-2008, GB/T 1184-1996, GB 5226.1, HG/T 2454-2006 and QC/T 29082. Its Chinese classification code is D95.
Found what you need?
Document preview — JB/T 10879-2008
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10879-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the circular vibrating screens used on hot materials. It gives the product classification, the technical requirements, the test methods and the inspection rules, and then marking, labels, instructions for use, packaging, transport and storage. The screens within its field are circular vibrating screens for warm material, machines employed above all in road construction, in coking and in similar industries, where they classify loose material of small particle size by size while the material is still warm. Among the standards it quotes are GB/T 713-2008, GB/T 1184-1996, GB 5226.1, HG/T 2454-2006 and QC/T 29082. Its Chinese classification code is D95.
JB/T 10879-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 713-2008
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1239.4
GB/T 3633-1995 — Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB 5226.1
GB/T 6388
GB 9969.1
GB/T 13306
GB/T 13384
JB/T 1604
JB/T 4042
JB/T 5000.12
JB/T 5000.13
JB/T 5496
JB/T 9032
HG/T 2454-2006 — Solvent-thinned polyurethane coatings (two-component)
QC/T 29082
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
GB/T 10605-2015 — Center driving rotary-rake thickener
JB/T 10880-2025 — Linear vibrating screen for warm materials
JB/T 10657-2021 — Wide-deck forced-synchronization linear vibrating screens
JB/T 10882-2008 — Triple-shaft elliptical equal-thickness vibrating screens
6 Classification and status
Chinese Standard Classification (CCS): D 95
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 713-2008Steel plates for boilers and pressure vessels
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1239.4Hot coiled helical springs--Technical specifications
- GB/T 3633-1995Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
Similar standards
How to Download JB/T 10879-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
JB/T 10879-2008
$105.00