JB/T 10877-2008Double-shaft chain hammer crushers (English PDF)
双轴链锤式破碎机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10877-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10877-2008 is the English-translated version of 双轴链锤式破碎机.
JB/T 10877-2008 is a recommended Chinese machinery industry standard on double shaft chain hammer crushers. It lays down the types of the crusher and its basic parameters, the technical requirements and the test methods, the inspection rules, and then marking, packaging, transport and storage.
The crushers it applies to are those used in the fertilizer industry for crushing material that is at high temperature, high in moisture and strongly adhesive. Among the standards it quotes are GB/T 9239.1-2006, GB/T 13384, JB/T 5000.3, JB/T 5000.12 and JB/T 5000.15-2007.
The document is classified D94 in the Chinese system and 73.120 in the international one.
Found what you need?
Document preview — JB/T 10877-2008
National Standard of the People's Republic of China
- ICS
- 73.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10877-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on double shaft chain hammer crushers. It lays down the types of the crusher and its basic parameters, the technical requirements and the test methods, the inspection rules, and then marking, packaging, transport and storage. The crushers it applies to are those used in the fertilizer industry for crushing material that is at high temperature, high in moisture and strongly adhesive. Among the standards it quotes are GB/T 9239.1-2006, GB/T 13384, JB/T 5000.3, JB/T 5000.12 and JB/T 5000.15-2007. The document is classified D94 in the Chinese system and 73.120 in the international one.
JB/T 10877-2008 falls under ICS 73.120, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB 3768
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB 9969.1
GB/T 13306
GB/T 13384
JB/T 5000.3
JB/T 5000.12
JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 10883-2019 — Fixed-shaft multi-cylinder hydraulic cone crushers
JB/T 10876-2019 — Reversible impact hammer crushers
JB/T 10878-2018 — Short belt conveyors for crushing and screening equipment
6 Classification and status
International classification (ICS): 73.120
Chinese Standard Classification (CCS): D 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 9239.1-2006Mechanical vibration—Rotor balancing—Part 1:Introduction
- GB 9969.1General principles for preparation of instructions for use of industrial products
Similar standards
How to Download JB/T 10877-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 3768-1983 — Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 13306-1991 — Plates
JB/T 10877-2008
$105.00