JB/T 10824-2008Saddle stitching lines (English PDF)
骑马装订联动机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10824-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 10824-2008 is the English-translated version of 骑马装订联动机.
JB/T 10824-2008 is a recommended Chinese machinery industry standard covering saddle stitching lines. It specifies their types, their basic parameters and model designations, the requirements, the test methods and the inspection rules, and the provisions for signs, packaging, transport and storage.
The lines it applies to are those whose components work in interaction: the machines that feed sheets or signatures, the folding machines, the saddle stitcher, the three-side trimmer and the book closing device.
Among the standards it quotes are GB 5226.1-2002, GB/T 6388, GB 9969.1 and JB/T 8115.1. It sits under the Chinese classification J87 and under 87.100.10 in the international one.
Found what you need?
Document preview — JB/T 10824-2008
National Standard of the People's Republic of China
- ICS
- 87.100.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10824-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard covering saddle stitching lines. It specifies their types, their basic parameters and model designations, the requirements, the test methods and the inspection rules, and the provisions for signs, packaging, transport and storage. The lines it applies to are those whose components work in interaction: the machines that feed sheets or signatures, the folding machines, the saddle stitcher, the three-side trimmer and the book closing device. Among the standards it quotes are GB 5226.1-2002, GB/T 6388, GB 9969.1 and JB/T 8115.1. It sits under the Chinese classification J87 and under 87.100.10 in the international one.
JB/T 10824-2008 falls under ICS 87.100.10, in the field of paint and colour industries.
This catalogue holds 21,922 other JB/T standards.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB 9969.1
GB/T 13306
GB/T 13384
GB/T 14436
JB/T 3090
JB/T 8115.1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 10247-2016 — Open-pit crawler down-the-hole drills
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11015-2025 — Printing Machinery - Horizontal flatbed die-cutting machine for corrugated cardboard
JB/T 10828-2018 — Sheet-fed perfecting offset presses
JB/T 10827-2008 — Printing machinery - Web-fed decorative paper gravure presses
6 Classification and status
International classification (ICS): 87.100.10
Chinese Standard Classification (CCS): J 87
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 5226.1-2002Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB 9969.1General principles for preparation of instructions for use of industrial products
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
Similar standards
How to Download JB/T 10824-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 13306-1991 — Plates
JB/T 10824-2008
$105.00