JB/T 10821-2008Voltage reduction and three-phase balancing power saving devices for low-voltage AC systems (English PDF)
低压交流降压及三相平衡系统节电装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10821-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 10821-2008 is the English-translated version of 低压交流降压及三相平衡系统节电装置.
JB/T 10821-2008 is a recommended Chinese machinery industry standard for the devices that reduce voltage and balance the three phases in low-voltage AC systems in order to save energy.
For these units it fixes the terms and definitions, the classification, the electrical and mechanical performance requirements together with the matching test methods, the inspection rules, and the provisions on signs, packaging, transport and storage.
It applies to units whose rated working voltage is AC 1000 V and below, whose frequency is 50 Hz or 60 Hz and whose rated capacity is 3000 kVA and below. It quotes GB 4208, GB 7251.1-2005 and JB/T 8750-1998. Its classifications are K36 and ICS 29.120.
Found what you need?
Document preview — JB/T 10821-2008
National Standard of the People's Republic of China
- ICS
- 29.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10821-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the devices that reduce voltage and balance the three phases in low-voltage AC systems in order to save energy. For these units it fixes the terms and definitions, the classification, the electrical and mechanical performance requirements together with the matching test methods, the inspection rules, and the provisions on signs, packaging, transport and storage. It applies to units whose rated working voltage is AC 1000 V and below, whose frequency is 50 Hz or 60 Hz and whose rated capacity is 3000 kVA and below. It quotes GB 4208, GB 7251.1-2005 and JB/T 8750-1998. Its classifications are K36 and ICS 29.120.
JB/T 10821-2008 falls under ICS 29.120, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 4208
GB 7251.1-2005 — Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
JB/T 8750-1998 — Transformers for electrical control equipment
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 3836.9-2021 — Explosive atmospheres - Part 9: Equipment protection by encapsulation 'm'
GB 12476.1-2013 — Electrical apparatus for use in the presence of combustible dust -- Part 1: General requirements
JB/T 10386-2002 — Electronic expansion valves for household and similar air conditioners
JB/T 3752.1-2013 — Low-voltage switchgear and controlgear assemblies - Type designation method - Part 1: Low-voltage switchgear assemblies
JB/T 10316-2013 — Insulating supports and insulating materials for low-voltage switchgear and controlgear assemblies
JB/T 6319-2010 — Resistors - Basic technical requirements
6 Classification and status
International classification (ICS): 29.120
Chinese Standard Classification (CCS): K 36
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 10821-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4208-1993 — Degrees of protection provided by enclosure (IP code)
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 7251.1-2005 — Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
JB/T 10821-2008
$135.00