Valid

JB/T 10747-2007Specification for integral salient pole brushless three-phase synchronous generators (English PDF)

整体凸极式无刷三相同步发电机技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10747-2007 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 29, 2007

Implementation date

November 1, 2007

Scope

JB/T 10747-2007 is the English-translated version of 整体凸极式无刷三相同步发电机技术条件.

JB/T 10747-2007 is the Chinese machinery industry standard covering specification for integral salient pole brushless three-phase synchronous generators. It was issued on 29 May 2007 and has been in force since 1 November 2007, as a first edition.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2007 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 10747-2007

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 10747-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 29 May 2007 and has been in force since 1 November 2007.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 16 pages in English translation.

2 Scope Preview

JB/T 10747-2007 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 16 pages

4 Related standards

Standards on related subjects:

GB/T 12974.2-2023 — General specification for a.c. lift motor - Part 2: Permanent magnet synchronous motor

GB/T 7409.3-2007 — Excitation system for synchronous electrical machines -- Technical requirements of excitation system for large and medium synchronous generators

JB/T 10499-2005 — Guide for design and application of turbine generators under abnormal operating conditions

JB/T 14931-2025 — Technical Specifications for TYJB Series Direct-Drive Variable-Frequency Three-Phase Permanent Magnet Synchronous Motors for Mixing and Stirring Equipment

JB/T 14445-2025 — Technical Specifications and Energy Efficiency Classification for TYP Series Variable-frequency Three-phase Permanent Magnet Synchronous Motors (Frame Size 80~355)

JB/T 14444-2025 — Technical Specification for TCP Series (IP55) Variable-frequency Three-phase Synchronous Motor (Frame Size 90~280)

5 Classification and status

Chinese Standard Classification (CCS): K 21

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Similar standards

How to Download JB/T 10747-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10747-2007

$285.00