JB/T 10471-2017Rolling bearings - Slewing bearings (English PDF)
滚动轴承 转盘轴承
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10471-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2017
Implementation date
April 1, 2018
Scope
JB/T 10471-2017 is the English-translated version of 滚动轴承 转盘轴承.
JB/T 10471-2017 is the Chinese machinery industry standard covering rolling bearings - Slewing bearings. It was issued on 4 December 2017 and has been in force since 1 April 2018, replacing JB/T 10471-2004.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2017 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10471-2017
National Standard of the People's Republic of China
- Replacing
- JB/T 10471-2004
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols
- 5 Method of designation
- 5.1 Composition of the designation
- 5.2 Composition of the basic designation
- 5.3 Suffix designation
- 5.4 Examples of designation
- 6 Types of construction
- 7 Overall dimensions
- 8 Technical requirements
- 8.1 Material and heat treatment
- 8.2 Gear
- 8.3 Tolerances
- 8.4 Surface roughness
- 8.5 Clearance
- 8.6 Lubrication
- 8.7 Marking of the soft zone
- 8.8 Other requirements
- 9 Inspection methods
- 9.1 Inspection of the heat treatment quality
- 9.2 Detection of cracks and defects
- 9.3 Detection of the gear errors
- 9.4 Measurement of the running accuracy
- 9.5 Measurement of the clearance
- 10 Inspection rules
- 11 Marking
- 12 Packaging
- 13 Transport and storage
- 14 Mounting and maintenance
- Annex A (informative) Methods of measuring the radial composite run-out of the gears
- A.1 Measurement of the radial composite run-out of the internal gear of the complete bearing
- A.2 Measurement of the radial composite run-out of the external gear of the complete bearing
- A.3 Other methods of measurement
- Annex B (informative) Mounting and maintenance of the bearing
- B.1 Mounting surface of the supporting member
- B.2 Method of mounting
- B.3 Preload of the mounting bolts
- B.4 Maintenance of the bearing
- Figure 1 Four point contact ball bearing without gear
- Figure 2 Four point contact ball bearing with external gear
- Figure 3 Four point contact ball bearing with internal gear
- Figure 4 Double row ball bearing with balls of different diameters, without gear
- Figure 5 Double row ball bearing with balls of different diameters, with external gear
- Figure 6 Double row ball bearing with balls of different diameters, with internal gear
- Figure 7 Crossed cylindrical roller bearing without gear
- Figure 8 Crossed cylindrical roller bearing with external gear
- Figure 9 Crossed cylindrical roller bearing with internal gear
- Figure 10 Three row cylindrical roller combined bearing without gear
- Figure 11 Three row cylindrical roller combined bearing with external gear
- Figure 12 Three row cylindrical roller combined bearing with internal gear
- Figure 13 Ball and roller combined bearing without gear
- Figure 14 Ball and roller combined bearing with external gear
- Figure 15 Measurement of the axial run-out and the tilt of the inner ring
- Figure 16 Measurement of the axial run-out and the tilt of the outer ring
- Figure 17 Measurement of the axial clearance
- Figure A.1 Measurement of the radial composite run-out of the internal gear of the complete bearing
- Figure A.2 Measurement of the radial composite run-out of the external gear of the complete bearing
- Figure B.1 Flatness of the mounting surface of the supporting member and its inclination over the radial width
- Table 1 Codes of the types of construction
- Table 2 Codes of the type of drive
- Table 3 Suffix codes
- Table 4 Codes of the material and of the heat treatment method
- Table 5 Overall dimensions of the four point contact ball bearing
- Table 6 Overall dimensions of the double row ball bearing with balls of different diameters
- Table 7 Overall dimensions of the crossed cylindrical roller bearing
- Table 8 Overall dimensions of the three row cylindrical roller combined bearing
- Table 9 Overall dimensions of the ball and roller combined bearing
- Table 10 Effective hardened depth of the raceway of the rings
- Table 11 Effective hardened depth of the tooth flank and of the tooth root
- Table 12 Dimensional tolerances
- Table 13 Running accuracy of the bearing
- Table 14 Surface roughness
- Table 15 Axial clearance of the four point contact ball bearing
- Table 16 Axial clearance of the double row ball bearing with balls of different diameters
- Table 17 Axial clearance of the crossed cylindrical roller bearing
- Table 18 Clearance of the three row cylindrical roller combined bearing
- Table 19 Axial clearance of the ball and roller combined bearing
- Table B.1 Technical requirements for the mounting surface of the supporting member
- Table B.2 Preload of the bolts commonly used
What this standard covers
This standard specifies the structural type, code method, external dimensions, technical requirements, measurement methods, inspection rules, marking, packaging, transportation and storage, installation and maintenance requirements of the slewing bearing.
Document data
Chinese classification (CCS): J11.
Estimated length of the Chinese original: 31,337 words.
Supersedes the earlier edition JB/T 10471-2004.
4 Symbols
5 Method of designation
6 Types of construction
7 Overall dimensions
8 Technical requirements
9 Inspection methods
10 Inspection rules
11 Marking
12 Packaging
13 Transport and storage
14 Mounting and maintenance
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 10471
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10471-2017 | Rolling bearings - Slewing bearings | current edition | Current |
| JB/T 10471-2004 | Rolling bearings - Slewing bearings | previous edition | Superseded |
This page sells the current edition, JB/T 10471-2017. Earlier editions are listed for reference only.
How to Download JB/T 10471-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 10471-2017
$375.00