JB/T 10315.1-2013Specification for high voltage three-phase induction motors - Part 1: YKS, YKS-W, YQF series (frame size 355 to 630) (English PDF)
高压三相异步电动机技术条件 第1部分：YKS、YKS-W、YQF系列（机座号355～630）
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10315.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10315.1-2013 is the English-translated version of 高压三相异步电动机技术条件 第1部分：YKS、YKS-W、YQF系列（机座号355～630）.
JB/T 10315.1-2013 is the Chinese machinery industry standard covering specification for high voltage three-phase induction motors, Part 1: YKS, YKS-W, YQF series (frame size 355 to 630).
It was issued on 31 December 2013 and has been in force since 1 July 2014, replacing JB/T 10315.1-2002. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2013 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10315.1-2013
National Standard of the People's Republic of China
- Replacing
- JB/T 10315.1-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Type, basic parameters and dimensions
- 4 Technical requirements
- 5 Inspection rules
- 6 Marking, packaging and warranty period
- Figure 1 Diagram of the mounting dimensions and overall dimensions of the motor
- Table 1 Correspondence between the frame number and the synchronous speed and power
- Table 2 Mounting dimensions, overall dimensions and tolerances
- Table 3 Dimensions and tolerances of the shaft extension key
- Table 4 Guaranteed values of efficiency and power factor
- Table 5 Permissible reduction of the efficiency
- Table 6 Guaranteed values of the ratio of locked rotor torque to rated torque
- Table 7 Guaranteed values of the ratio of locked rotor current to rated current
- Table 8 Tolerances on the guaranteed values of the electrical performance
- Table 9 Limits of the vibration severity (root mean square values)
- Table 10 Noise values of the A-weighted sound power level
- Table 11 Load moment of inertia of the motor
- Table 12 Marking of the terminals
What this standard covers
This standard specifies the closure with air - water cooler climate protection and three-phase asynchronous motor type, basic parameters and dimensions, technical requirements, inspection rules, and requirements for marking, packaging and warranty period.
Document data
International classification (ICS): 29.160.30.
Chinese classification (CCS): K22.
Estimated length of the Chinese original: 14,158 words.
Supersedes the earlier edition JB/T 10315.1-2002.
Standards quoted by this document
GB/T 191-2008; GB 755-2008; GB/T 997-2008; GB/T 1032-2012; GB/T 1993-1993; GB/T 4772.2-1999; GB/T 4942.1-2006; GB 10068-2008; GB/T 10069.1-2006; GB 14711-2013; GB/T 22715-2008; JB/T 4375-1999
3 Type, basic parameters and dimensions
4 Technical requirements
5 Inspection rules
6 Marking, packaging and warranty period
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 10315.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10315.1-2013 | Specification for high voltage three-phase induction motors - Part 1: YKS, YKS-W, YQF series (frame size 355 to 630) | current edition | Current |
| JB/T 10315.1-2002 | Specification for high voltage three-phase induction motors - Part 1: YKS, YKS-W, YQF series (frame size 355 to 630) | previous edition | Superseded |
This page sells the current edition, JB/T 10315.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 10315.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10315.2-2013 — Specification for High Voltage Three-phase Induction Motors - Part 2: YKK, YKK-W Series (Frame Numbers 355~630)
JB/T 10315.2-2002 — Specification for YKK and YKK-W series high-voltage three-phase induction motors (frame size 355 to 630)
JB/T 10315.1-2002 — Specification for YKS, YKS-W and YQF series high-voltage three-phase induction motors (frame size 355 to 630)
Secure payment via Stripe
Payments accepted
JB/T 10315.1-2013
$135.00