JB/T 10237-2001Rolling bearings - Specifications of vibration (acceleration) for tapered roller bearings (English PDF)
滚动轴承 圆锥滚子轴承 振动（加速度）技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10237-2001 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 23, 2001
Implementation date
October 1, 2001
Scope
JB/T 10237-2001 is the English-translated version of 滚动轴承 圆锥滚子轴承 振动（加速度）技术条件.
JB/T 10237-2001 is the Chinese standard "Rolling bearings - Specifications of vibration (acceleration) for tapered roller bearings".
Its scope clause reads: This standard specifies specifications of vibration (acceleration) for finished tapered roller bearings with boundary dimensions in accordance with Series 30200, 32200, 30300 and 32300 in GB/T 297, and nominal bore diameter between 15~60mm.
Group Z vibration (acceleration) specified in this standard is the basic requirements for Grade 0 bearings which are applicable to production gauging of bearing manufacturer; Groups Z1 and Z2 are applicable to bearings that the user has requirements on their vibration (acceleration), and are for manufacturer gauging and user acceptance.
Found what you need?
Document preview — JB/T 10237-2001
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Definitions and Units
- 4 Technical Requirements
- 5 Measurement Method
- 6 Gauging Rules
1 Scope
This standard specifies specifications of vibration (acceleration) for finished tapered roller bearings with boundary dimensions in accordance with Series 30200, 32200, 30300 and 32300 in GB/T 297, and nominal bore diameter between 15~60mm.
Group Z vibration (acceleration) specified in this standard is the basic requirements for Grade 0 bearings which are applicable to production gauging of bearing manufacturer; Groups Z1 and Z2 are applicable to bearings that the user has requirements on their vibration (acceleration), and are for manufacturer gauging and user acceptance.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 10237-2001
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 106-2024 — Valves marking and coating
JB/T 14540-2024 — Sanitary cam rotor pumps
JB/T 14754-2024 — Equipment for disposal of dead and diseased livestock and poultry
Secure payment via Stripe
Payments accepted
JB/T 10237-2001
$154.00