Valid

JB/T 10148-1999Press brakes - Safety technical requirements (English PDF)

板料折弯机 安全技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10148-1999 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 8, 1999

Implementation date

March 1, 2000

Scope

JB/T 10148-1999 is the English-translated version of 板料折弯机 安全技术要求.

The safety of press brakes is governed by JB/T 10148-1999, a machinery industry standard of China. It sets the safety requirements that govern the design, the manufacture and the use of sheet metal bending machines, and it applies to such machines throughout the service life laid down for them.

Its reference list is long and includes GB 2893-1982, GB 2894-1996, GB/T 3766-1983, GB 5083-1999, GB/T 5226.1-1996, GB/T 15706.1-1995, GB/T 15706.2-1995, GB 16754-1997, GB 17120-1997, JB/T 1829-1997 and JB 9976-1999.

The Chinese classification places it in J62 and the international classification in 25.120. Issued on 8 October 1999, it has applied since 1 March 2000.

Found what you need?

Document preview — JB/T 10148-1999

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 10148-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 8 October 1999 and has been in force since 1 March 2000.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 16 pages in English translation.

2 Scope Preview

The safety of press brakes is governed by JB/T 10148-1999, a machinery industry standard of China. It sets the safety requirements that govern the design, the manufacture and the use of sheet metal bending machines, and it applies to such machines throughout the service life laid down for them. Its reference list is long and includes GB 2893-1982, GB 2894-1996, GB/T 3766-1983, GB 5083-1999, GB/T 5226.1-1996, GB/T 15706.1-1995, GB/T 15706.2-1995, GB 16754-1997, GB 17120-1997, JB/T 1829-1997 and JB 9976-1999. The Chinese classification places it in J62 and the international classification in 25.120.

JB/T 10148-1999 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB 2893-1982 — Safety colours

GB 2894-1996 — Safety signs

GB/T 3766-1983 — Hydraulic fluid power--General rules for the application of equipment to transmission and control systems

GB 5083-1999 — General rules for designing the production facilities in accordance with safety and health requirements

GB/T 5226.1-1996 — Electrical equipment of industrial machines. Part 1: General requirements

GB/T 6527.2-1986

GB/T 6576-1986 — Machine tools--Lubrication systems

GB/T 7932-1987 — Pneumatic fluid power--General rules for the application of equipment to transmission and control systems

GB/T 14775-1993 — General ergonomics requirements for controller

GB/T 14776-1993 — Ergonomics. Principles for determing dimensions of work places in manufacturing areas and the dimensions

GB/T 15706.1-1995 — Safety machinery--Basic, concept, general principles for design--Part 1: Basic terminology, methodology

GB/T 15706.2-1995 — Safety of machinery--Basic concept, general principles for design. Part 2: Technical principles and specifications

GB/T 16251-1996 — Ergonomic principles in the design of work systems

GB 16754-1997 — Safety of machinery--Emergency stop--Principles for design

GB/T 16855.1-1997 — Safety of machinery--Safety related parts of control systems--Part 1: General principles for design

GB/T 16856-1997 — Safety of machinery--Principles for risk assessment

GB 17120-1997 — Metalforming machinery--Safety requirements

JB/T 1829-1997 — Metal forming machinery - General technical specifications

JB/T 3623-1984 — Metal forming machinery - Noise measurement methods

JB/T 9954-1999 — Hydraulic systems of metal forming machinery - Cleanliness

JB 9976-1999 — Press brakes and folding machines - Noise limits

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 16 pages

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 6527.2-1986

Similar standards

How to Download JB/T 10148-1999

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10148-1999

$389.00