JB/T 10009-2010Measuring stand (English PDF)
测量台架
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10009-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 10009-2010 is the English-translated version of 测量台架.
JB/T 10009-2010 is a recommended Chinese machinery industry standard on measuring stands, the benches on which a comparator is held for measurement. It fixes the terms and definitions for the measuring stand, its types and basic parameters, the requirements it must satisfy, the test methods, and the marking and packaging.
JB/T 10009-2010 applies to stands used to clamp a comparator, or the sensing element of a comparator, whose scale division is not finer than 0.05 µm. It quotes GB/T 17164.
The standard replaces JB/T 10009-1999, the earlier edition published under the same number, and it is filed under the Chinese classification J42 with the international classification 17.040.30.
Found what you need?
Document preview — JB/T 10009-2010
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Replacing
- JB/T 10009-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10009-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 10009-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on measuring stands, the benches on which a comparator is held for measurement. It fixes the terms and definitions for the measuring stand, its types and basic parameters, the requirements it must satisfy, the test methods, and the marking and packaging. JB/T 10009-2010 applies to stands used to clamp a comparator, or the sensing element of a comparator, whose scale division is not finer than 0.05 µm. It quotes GB/T 17164. The standard replaces JB/T 10009-1999, the earlier edition published under the same number, and it is filed under the Chinese classification J42 with the international classification 17.040.30.
JB/T 10009-2010 falls under ICS 17.040.30, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 17164
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10009-1999 (earlier edition)
Standards on related subjects:
GB/T 10932-2024 — Screw thread micrometer
GB/T 1218-2018 — Depth micrometer
GB/T 1957-2006 — Tolerances and general features for plain limit gauges
JB/T 10006-2018 — Inside micrometer
JB/T 10013-2013 — Universal Involute Measuring Instrument
JB/T 10012-2013 — Universal Gear Measuring Instrument
6 Classification and status
International classification (ICS): 17.040.30
Chinese Standard Classification (CCS): J 42
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of JB/T 10009
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10009-2010 | Measuring stand | current edition | Current |
| JB/T 10009-1999 | Measuring stand | previous edition | Superseded |
This page sells the current edition, JB/T 10009-2010. Earlier editions are listed for reference only.
How to Download JB/T 10009-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17164-1997 — Glossary of terms used in dimensional measuring instruments--Product terms
GB/T 17164-2008 — Glossary of terms used in dimensional measuring instruments - Product terms
GB/T 17164-2022 — Glossary of terms for dimensional measuring instruments - Product terms
JB/T 10009-2010
$145.00