HG/T 4859-2015Methods for chemical composition analysis of room temperature carbonyl sulfide hydrolysis catalysts (English PDF)
常温氧硫化碳水解催化剂化学成分分析方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4859-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 4859-2015 is the English-translated version of 常温氧硫化碳水解催化剂化学成分分析方法.
HG/T 4859-2015 is the Chinese chemical industry standard setting the methods for the chemical composition analysis of room temperature carbonyl sulfide hydrolysis catalysts.
It gives the procedures for determining the mass fractions of hydroxide, aluminium oxide and sodium oxide in the catalyst, together with the loss on ignition. The methods apply to the room temperature COS hydrolysis catalysts that carry potassium as the main active ingredient on an alumina support.
The analyses use standard solutions prepared to GB/T 601 and GB/T 603, water to GB/T 6682, sampling to GB/T 6679 and sieves to GB/T 6003.1. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 4859-2015
National Standard of the People's Republic of China
- ICS
- 71.100.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4859-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard setting the methods for the chemical composition analysis of room temperature carbonyl sulfide hydrolysis catalysts. It gives the procedures for determining the mass fractions of hydroxide, aluminium oxide and sodium oxide in the catalyst, together with the loss on ignition. The methods apply to the room temperature COS hydrolysis catalysts that carry potassium as the main active ingredient on an alumina support. The analyses use standard solutions prepared to GB/T 601 and GB/T 603, water to GB/T 6682, sampling to GB/T 6679 and sieves to GB/T 6003.1.
HG/T 4859-2015 falls under ICS 71.100.99, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 601
GB/T 603
GB/T 6003.1
GB/T 6679
GB/T 6682
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 18881-2017 — Catalyst for light-duty petrol vehicle exhaust purification
GB/T 31584-2015 — Plate-type DeNOx catalysts
HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate
HG/T 4863-2015 — High palladium catalysts for ammonia oxidation to nitric acid
HG/T 4860-2015 — Methanol-to-light-olefins catalysts
HG/T 4853-2015 — Caesium catalysts for sulphuric acid production
6 Classification and status
International classification (ICS): 71.100.99
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6003.1Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
- GB/T 6679General rules for sampling solid chemical products
- GB/T 6682Water for analytical laboratory use - Specification and test methods
Similar standards
How to Download HG/T 4859-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6003.1-1997 — Test sieves of metal wire cloth
GB/T 6003.1-2012 — Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
GB/T 6003.1-2022 — Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
HG/T 4859-2015
$95.00