HG/T 4764-2014Conductive mica powders for coatings (English PDF)
涂料用导电云母粉
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4764-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 24, 2014
Implementation date
June 1, 2015
Scope
HG/T 4764-2014 is the English-translated version of 涂料用导电云母粉.
Conductive mica powders for use in coatings are covered by HG/T 4764-2014, a recommended chemical industry standard. It classifies these powders and then gives the requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.
The products in view are made from natural mica as the raw material and rendered conductive by a chemical coating process. The methods draw on GB/T 1717-1986, GB/T 3186, GB/T 5211.3-1985, GB/T 5211.15, GB/T 8170, HG/T 3852-2006 and JC/T 596-1995. Issued on 24 December 2014, it has applied since 1 June 2015.
Found what you need?
Document preview — HG/T 4764-2014
National Standard of the People's Republic of China
- ICS
- 87.060.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4764-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2014 and has been in force since 1 June 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Conductive mica powders for use in coatings are covered by HG/T 4764-2014, a recommended chemical industry standard. It classifies these powders and then gives the requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. The products in view are made from natural mica as the raw material and rendered conductive by a chemical coating process. The methods draw on GB/T 1717-1986, GB/T 3186, GB/T 5211.3-1985, GB/T 5211.15, GB/T 8170, HG/T 3852-2006 and JC/T 596-1995.
HG/T 4764-2014 falls under ICS 87.060.10, in the field of paint and colour industries.
This catalogue holds 140 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1717-1986 — Determination of pH value of an aqueous suspension of pigments
GB/T 3186
GB/T 5211.3-1985 — Determination of matter volatile of pigments at 105Centigrade
GB/T 5211.15
GB/T 8170
HG/T 3852-2006 — Pigments - Determination of residue on sieve
JC/T 596-1995 — Wet-milled mico powder
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 3989-2014 — Resorcinol (1,3-benzenediol)
HG/T 4715-2014 — 3,4-Dichloronitrobenzene
HG/T 3852-2006 — Pigments - Determination of residue on sieve
HG/T 3005-2026 — C. I. Pigment yellow 12
HG/T 2883-2026 — Pigment scarlet
HG/T 4762-2014 — Phthalocyanine blue BGS
6 Classification and status
International classification (ICS): 87.060.10
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1717-1986Determination of pH value of an aqueous suspension of pigments
- GB/T 3186Paints, varnishes and raw materials for paints and varnishes -- Sampling
- GB/T 5211.3-1985General methods of test for pigments and extenders - Part 3: Determination of matter volatile at 105 degree-Celsius
- GB/T 5211.15General methods of test for pigments and extenders -- Part 15: Determination of oil absorption value
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
- HG/T 3852-2006Pigments - Determination of residue on sieve
Similar standards
How to Download HG/T 4764-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1717-1986 — Determination of pH value of an aqueous suspension of pigments
GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling
GB/T 5211.15-1988 — Determination of oil absorption value of pigments
HG/T 4764-2014
$85.00