HG/T 4748-2014Test method for coefficient of friction of drive belts (English PDF)
传动带摩擦系数试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4748-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 24, 2014
Implementation date
June 1, 2015
Scope
HG/T 4748-2014 is the English-translated version of 传动带摩擦系数试验方法.
HG/T 4748-2014 is a recommended chemical industry standard that describes how the coefficient of friction of drive belts is tested. It covers light flat belts, flat belts with a polyamide film base no thicker than 0.5 mm, and V-ribbed belts of the PK type, and its scope is limited to those belts.
As a method document it defines the friction test alone, without setting product requirements for the belts themselves. Only two standards are quoted, GB/T 2941 and GB/T 17516.2.
The classification is G42 in China and 21.220.10 internationally, the heading for belt drives. It was issued on 24 December 2014 and has applied since 1 June 2015.
Found what you need?
Document preview — HG/T 4748-2014
National Standard of the People's Republic of China
- ICS
- 21.220.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4748-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2014 and has been in force since 1 June 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended chemical industry standard that describes how the coefficient of friction of drive belts is tested. It covers light flat belts, flat belts with a polyamide film base no thicker than 0.5 mm, and V-ribbed belts of the PK type, and its scope is limited to those belts. As a method document it defines the friction test alone, without setting product requirements for the belts themselves. Only two standards are quoted, GB/T 2941 and GB/T 17516.2. The classification is G42 in China and 21.220.10 internationally, the heading for belt drives.
HG/T 4748-2014 falls under ICS 21.220.10, in the field of mechanical systems and components.
This catalogue holds 7 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 2941-2006 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 17516.2-1988
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 5563-2025 — Rubber and plastics hoses and hose assemblies - Hydrostatic testing
GB/T 5563-2013 — Rubber and plastics hoses and hose assemblies -- Hydrostatic testing
GB/T 5564-2006 — Rubber and plastics hoses -- Sub ambient temperature flexibility tests
HG/T 6164.2-2026 — Large-diameter layflat rubber hose for fluid transmission-Specification - Part 2: Oil delivery hoses
HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
HG/T 3047-2024 — Determination of air permeability of rubber or plastic coated fabrics
6 Classification and status
International classification (ICS): 21.220.10
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download HG/T 4748-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2941-2006 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 2018-2026 — Lightweight rubber shoes
HG/T 4748-2014
$95.00