HG/T 4682-2014Methods for chemical composition analysis of cyclohexanol dehydrogenation catalysts (English PDF)
环己醇脱氢催化剂化学成分分析方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4682-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 14, 2014
Implementation date
April 1, 2015
Scope
HG/T 4682-2014 is the English-translated version of 环己醇脱氢催化剂化学成分分析方法.
HG/T 4682-2014 is the recommended chemical industry standard for the analysis of the chemical composition of catalysts used in the dehydrogenation of cyclohexanol.
It describes how the constituents of such catalysts are determined, among them moisture, zinc oxide, copper oxide, aluminium oxide, ferric oxide, sodium oxide and loss on ignition.
The scope is the catalyst itself, so the document is a set of analytical methods rather than a product specification. Reagents, standard solutions, sieves and laboratory water are those of GB/T 601, GB/T 603, GB/T 6003.1 and GB/T 6682, and GB/T 6679 is cited as well. Issued on 14 October 2014, it has applied since 1 April 2015.
Found what you need?
Document preview — HG/T 4682-2014
National Standard of the People's Republic of China
- ICS
- 71.100.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4682-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 October 2014 and has been in force since 1 April 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard for the analysis of the chemical composition of catalysts used in the dehydrogenation of cyclohexanol. It describes how the constituents of such catalysts are determined, among them moisture, zinc oxide, copper oxide, aluminium oxide, ferric oxide, sodium oxide and loss on ignition. The scope is the catalyst itself, so the document is a set of analytical methods rather than a product specification. Reagents, standard solutions, sieves and laboratory water are those of GB/T 601, GB/T 603, GB/T 6003.1 and GB/T 6682, and GB/T 6679 is cited as well.
HG/T 4682-2014 falls under ICS 71.100.99, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 601
GB/T 603
GB/T 6003.1
GB/T 6679
GB/T 6682
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 37354-2019 — Analytical method of chemical composition for activated carbon mercury removal catalyst
GB/T 34248-2017 — Performance test method of three-way catalyst
HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate
HG/T 4678-2025 — Composition analysis methods of iron-based Fischer-Tropsch catalysts
HG/T 4676-2025 — Physical property analysis methods for iron-based Fischer-Tropsch catalysts
HG/T 4674-2014 — Test method for activity of nickel-based gas-phase benzene hydrogenation catalysts
6 Classification and status
International classification (ICS): 71.100.99
Chinese Standard Classification (CCS): G 74
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6003.1Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
- GB/T 6679General rules for sampling solid chemical products
- GB/T 6682Water for analytical laboratory use - Specification and test methods
Similar standards
How to Download HG/T 4682-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6003.1-1997 — Test sieves of metal wire cloth
GB/T 6003.1-2012 — Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
GB/T 6003.1-2022 — Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
HG/T 4682-2014
$85.00