HG/T 4674-2014Test method for activity of nickel-based gas-phase benzene hydrogenation catalysts (English PDF)
镍系气相苯加氢催化剂活性试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4674-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 5, 1995
Implementation date
March 1, 1996
Scope
HG/T 4674-2014 is the English-translated version of 镍系气相苯加氢催化剂活性试验方法.
HG/T 4674-2014 sets out the test method for the activity of nickel-based catalysts used in the gas phase hydrogenation of benzene, and it carries the recommended status of a Chinese chemical industry standard.
The method applies to catalysts whose main active component is nickel and that are prepared by precipitation or by impregnation for the hydrogenation of benzene in organic synthesis.
The document describes how activity is measured and does not itself fix product grades. GB/T 6003.1 and GB/T 6678 are the standards quoted in its text. It is classified G74 in the Chinese system and 71.100.99 in the international one.
Found what you need?
Document preview — HG/T 4674-2014
National Standard of the People's Republic of China
- ICS
- 71.100.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4674-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 July 1995 and has been in force since 1 March 1996.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
HG/T 4674-2014 sets out the test method for the activity of nickel-based catalysts used in the gas phase hydrogenation of benzene, and it carries the recommended status of a Chinese chemical industry standard. The method applies to catalysts whose main active component is nickel and that are prepared by precipitation or by impregnation for the hydrogenation of benzene in organic synthesis. The document describes how activity is measured and does not itself fix product grades. GB/T 6003.1 and GB/T 6678 are the standards quoted in its text. It is classified G74 in the Chinese system and 71.100.99 in the international one.
HG/T 4674-2014 falls under ICS 71.100.99, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6003.1
GB/T 6678
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 37354-2019 — Analytical method of chemical composition for activated carbon mercury removal catalyst
GB/T 34248-2017 — Performance test method of three-way catalyst
HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate
HG/T 4678-2025 — Composition analysis methods of iron-based Fischer-Tropsch catalysts
HG/T 4676-2025 — Physical property analysis methods for iron-based Fischer-Tropsch catalysts
HG/T 4676-2014 — Test methods for physical properties of iron-based Fischer-Tropsch synthesis catalysts
6 Classification and status
International classification (ICS): 71.100.99
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download HG/T 4674-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6003.1-1997 — Test sieves of metal wire cloth
GB/T 6003.1-2012 — Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
GB/T 6003.1-2022 — Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
HG/T 4674-2014
$70.00