HG/T 4664-2014Latex finger cots (English PDF)
胶乳指套
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4664-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 14, 2014
Implementation date
April 1, 2015
Scope
HG/T 4664-2014 is the English-translated version of 胶乳指套.
HG/T 4664-2014 is the Chinese chemical industry standard for latex finger cots. It classifies them, states the requirements they must meet, and gives the test methods, the inspection rules and the rules for packaging, labelling, transport and storage.
The finger cots within its scope are those made from natural rubber latex by the conventional dipping route. It draws on GB/T 528-2009, GB/T 2941-2006, GB/T 3512-2001, GB/T 2828.1-2012 and GB/T 191-2008.
The text is a non-equivalent adoption of ASTM D 3772-2001. Issued on 14 October 2014, it has applied since 1 April 2015.
Found what you need?
Document preview — HG/T 4664-2014
National Standard of the People's Republic of China
- ICS
- 83.140.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4664-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 October 2014 and has been in force since 1 April 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for latex finger cots. It classifies them, states the requirements they must meet, and gives the test methods, the inspection rules and the rules for packaging, labelling, transport and storage. The finger cots within its scope are those made from natural rubber latex by the conventional dipping route. It draws on GB/T 528-2009, GB/T 2941-2006, GB/T 3512-2001, GB/T 2828.1-2012 and GB/T 191-2008. The text is a non-equivalent adoption of ASTM D 3772-2001.
HG/T 4664-2014 falls under ICS 83.140.99, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 2941-2006 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 10213-2025 — Single-use medical rubber examination gloves
HG/T 3055-2012 — Latex foam - Determination of apparent density
GB/T 12825-2003 — polymeric materials, cellular flexible -- Determination of hardness by indentation technique
HG/T 4666-2023 — Latex foam
HG/T 4663-2014 — Latex for polyester filament base fabrics
HG/T 4662-2014 — Latex products for sphygmomanometers
6 Classification and status
International classification (ICS): 83.140.99
Chinese Standard Classification (CCS): G 44
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 528-2009Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2941-2006Rubber - General procedures for preparing and conditioning test pieces for physical test methods
- GB/T 3512-2001Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
How to Download HG/T 4664-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 2941-2006 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
HG/T 4664-2014
$40.00