HG/T 4602-2014Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (English PDF)
轻型输送带 切割式轻型输送带的宽度和长度极限偏差
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4602-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
HG/T 4602-2014 is the English-translated version of 轻型输送带 切割式轻型输送带的宽度和长度极限偏差.
HG/T 4602-2014 is the recommended Chinese chemical industry standard on the tolerances allowed on the widths and lengths of cut light conveyor belts. It describes how those dimensions are to be stated and measured and fixes the permitted limit deviations, the measurement itself being made in accordance with ISO 21183-1.
In content the standard is identical to the international standard ISO 15147:2012. It is a short document, classified under conveyors and conveyor belts in the international classification and in the rubber group of the Chinese one. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — HG/T 4602-2014
National Standard of the People's Republic of China
- ICS
- 53.040.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4602-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard on the tolerances allowed on the widths and lengths of cut light conveyor belts. It describes how those dimensions are to be stated and measured and fixes the permitted limit deviations, the measurement itself being made in accordance with ISO 21183-1. In content the standard is identical to the international standard ISO 15147:2012. It is a short document, classified under conveyors and conveyor belts in the international classification and in the rubber group of the Chinese one.
HG/T 4602-2014 falls under ICS 53.040.20, in the field of materials handling equipment.
This catalogue holds 18 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
ISO 21183-1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 5563-2025 — Rubber and plastics hoses and hose assemblies - Hydrostatic testing
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
HG/T 6164.2-2026 — Large-diameter layflat rubber hose for fluid transmission-Specification - Part 2: Oil delivery hoses
HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
HG/T 4604-2014 — Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials - Adjustment of take-up device
6 Classification and status
International classification (ICS): 53.040.20
Chinese Standard Classification (CCS): G 42
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 21183-1
Similar standards
How to Download HG/T 4602-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 4602-2014
$65.00