HG/T 4571-2013Mechanical seals for pharmaceutical mixing equipment - Technical specifications (English PDF)
医药搅拌设备用机械密封技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4571-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 4571-2013 is the English-translated version of 医药搅拌设备用机械密封技术条件.
HG/T 4571-2013 is a recommended chemical industry standard of China giving the technical specifications for the mechanical seals of pharmaceutical mixing equipment.
It states the requirements for these seals, the test methods, the inspection rules and the rules for packaging, transport and storage. Its scope takes in the sealing devices fitted to pharmaceutical mixing equipment and extends to other similar devices.
The standard carries the Chinese classification G91 and two international classifications, 71.120.10 and 21.140. It quotes GB/T 1184, HG/T 2099, JB/T 7757.2, JB/T 11107 and YY 0033. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 4571-2013
National Standard of the People's Republic of China
- ICS
- 71.120.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4571-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended chemical industry standard of China giving the technical specifications for the mechanical seals of pharmaceutical mixing equipment. It states the requirements for these seals, the test methods, the inspection rules and the rules for packaging, transport and storage. Its scope takes in the sealing devices fitted to pharmaceutical mixing equipment and extends to other similar devices. The standard carries the Chinese classification G91 and two international classifications, 71.120.10 and 21.140. It quotes GB/T 1184, HG/T 2099, JB/T 7757.2, JB/T 11107 and YY 0033.
HG/T 4571-2013 falls under ICS 71.120.10, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1184
HG/T 2099
JB/T 7757.2
JB/T 11107
YY 0033
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 2100-2020 — Mechanical seals for liquid ring chlorine pumps
HG/T 2099-2020 — Test code for mechanical seals of stirred vessels
HG/T 2044-2020 — Plasma-sprayed chromium oxide seal rings for mechanical seals - Technical specifications
6 Classification and status
International classification (ICS): 71.120.10
Chinese Standard Classification (CCS): G 91
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- HG/T 2099Test code for mechanical seals of stirred vessels
- JB/T 7757.2Rubber O-rings for mechanical seals
- JB/T 11107Cylindrical coil spring for mechanical seal
- YY 0033Good manufacturing practice for sterile medical devices
Similar standards
How to Download HG/T 4571-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
HG/T 2099-2003 — Mechanical seal testing code for stirred vessels
HG/T 2099-2020 — Test code for mechanical seals of stirred vessels
HG/T 4571-2013
$165.00