Valid

HG/T 4434-2012Spin finishes for polyester draw textured yarn (DTY) (English PDF)

涤纶低弹丝油剂

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4434-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 28, 2012

Implementation date

June 1, 2013

Scope

HG/T 4434-2012 is the English-translated version of 涤纶低弹丝油剂.

HG/T 4434-2012 is the recommended Chinese chemical industry standard for spin finishes used on polyester draw textured yarn, the material usually shortened to DTY.

It sets the requirements for the finish, the test methods that verify them, the inspection rules, and the provisions for marking, labelling, packaging, transport and storage.

It is written for quality control of the finish oil used in the false-twist draw texturing process that produces DTY yarn. Chinese classification G70 and international class 71.100.40 place it with surface-active agents.

Checking under it relies on GB/T 267, GB/T 1884, GB/T 6682, GB/T 8170, GB/T 11275, GB/T 15357 and HG/T 4164. Issued on 28 December 2012, it has applied since 1 June 2013.

Found what you need?

Document preview — HG/T 4434-2012

National Standard of the People's Republic of China

ICS
71.100.40

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4434-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard for spin finishes used on polyester draw textured yarn, the material usually shortened to DTY. It sets the requirements for the finish, the test methods that verify them, the inspection rules, and the provisions for marking, labelling, packaging, transport and storage. It is written for quality control of the finish oil used in the false-twist draw texturing process that produces DTY yarn. Chinese classification G70 and international class 71.100.40 place it with surface-active agents. Checking under it relies on GB/T 267, GB/T 1884, GB/T 6682, GB/T 8170, GB/T 11275, GB/T 15357 and HG/T 4164.

HG/T 4434-2012 falls under ICS 71.100.40, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 267-1988 — Petroleum products--Determination of flash and fire points--Open cup

GB/T 1884-2000 — Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method [including MODIFICATION 1]

GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods

GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values

GB/T 11275-2007 — Surface active agents -- Determination of water content

GB/T 15357-1994 — Surface active agents and detergents--Determination of viscosity of liquid products using a rotational viscometer

HG/T 4164-2010 — Textile dyeing and finishing auxiliaries - Determination of pH value

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 1677-2023 — Determinating the epoxy value of plasticizers

GB/T 1668-2008 — Plasticizers - Determination of acid value and acidity

GB/T 1676-2008 — Determinating the iodine value of plasticizers

HG/T 4437-2012 — Textile dyeing and finishing auxiliaries - Fluorinated water and oil repellents

HG/T 4436-2012 — Textile dyeing and finishing auxiliaries - Levelling agents for polyester - Determination of colour change in dyeing

HG/T 4435-2012 — Textile dyeing and finishing auxiliaries - Determination of density

6 Classification and status

International classification (ICS): 71.100.40

Chinese Standard Classification (CCS): G 70

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4434-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4434-2012

$115.00