HG/T 4164-2010Textile dyeing and finishing auxiliaries - Determination of pH value (English PDF)
纺织染整助剂 pH值的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4164-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 22, 2010
Implementation date
March 1, 2011
Scope
HG/T 4164-2010 is the English-translated version of 纺织染整助剂 pH值的测定.
HG/T 4164-2010 is the Chinese chemical industry standard that sets out how the pH value of textile dyeing and finishing auxiliaries is determined.
The measurement is potentiometric: a glass electrode and a saturated calomel electrode are immersed in an aqueous solution of the auxiliary, and the potential difference between the two electrodes gives the pH of that solution.
The method applies to water-soluble textile dyeing and finishing auxiliaries of every type. It falls under Chinese classification G56 and international classification 71.100.40, surface-active agents.
It quotes GB/T 6682-2008 and GB/T 8170-2008. Issued on 22 November 2010, it has applied since 1 March 2011.
Found what you need?
Document preview — HG/T 4164-2010
National Standard of the People's Republic of China
- ICS
- 71.100.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4164-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 November 2010 and has been in force since 1 March 2011.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard that sets out how the pH value of textile dyeing and finishing auxiliaries is determined. The measurement is potentiometric: a glass electrode and a saturated calomel electrode are immersed in an aqueous solution of the auxiliary, and the potential difference between the two electrodes gives the pH of that solution. The method applies to water-soluble textile dyeing and finishing auxiliaries of every type. It falls under Chinese classification G56 and international classification 71.100.40, surface-active agents. It quotes GB/T 6682-2008 and GB/T 8170-2008.
HG/T 4164-2010 falls under ICS 71.100.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
4 Where this standard sits
It cites 2 standards, among them GB/T 6682-2008, GB/T 8170-2008, listed in full above.
6 other standards in this catalogue cite it, among them HG/T 4434-2012, HG/T 4437-2012, HG/T 4653-2014.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 21892-2015 — p-Aminophenol
GB/T 15336-2013 — Phthalic anhydride
HG/T 4296-2012 — p-Nitrophenol
HG/T 6402-2025 — 2,4-Diaminobenzenesulfonic acid
HG/T 4163-2010 — Aniline-2,5-disulfonic acid monosodium salt
HG/T 4162-2010 — 1,4-Diamino-2,3-dicyanoanthraquinone
7 Classification and status
International classification (ICS): 71.100.40
Chinese Standard Classification (CCS): G 70
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- HG/T 4653-2014Textile dyeing and finishing auxiliaries - Amino resin stiffening agents
- HG/T 4661-2014Textile dyeing and finishing auxiliaries - Phosphorus-free scouring agents
- HG/T 4729-2014Textile dyeing and finishing auxiliaries - Acid fixing agents
- HG/T 4742-2014Textile dyeing and finishing auxiliaries - Emulsion coating agents for textiles
- HG/T 4434-2012Spin finishes for polyester draw textured yarn (DTY)
- HG/T 4437-2012Textile dyeing and finishing auxiliaries - Fluorinated water and oil repellents
Similar standards
How to Download HG/T 4164-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 4164-2010
$95.00