HG/T 4331-2012Water treatment chemicals - Evaluation method for coagulation performance (English PDF)
水处理剂混凝性能的评价方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4331-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2012
Implementation date
March 1, 2013
Scope
HG/T 4331-2012 is the English-translated version of 水处理剂混凝性能的评价方法.
HG/T 4331-2012 is the recommended Chinese chemical industry standard that describes how the coagulation performance of water treatment chemicals is to be evaluated.
It specifies the coagulation and flocculation test used to judge a coagulant and the measurement of how well the chemical removes organic matter from water. The methods are meant for determining the coagulation performance of water treatment agents rather than for setting product specifications.
The standard sits under the Chinese classification G77 and under ICS 13.060.30 and 19.020. Its procedures rely on GB/T 601, GB/T 602-2002, GB/T 603-2002, GB/T 6682-2008 and GB/T 15456-2008. Issued on 7 November 2012, it has applied since 1 March 2013.
Found what you need?
Document preview — HG/T 4331-2012
National Standard of the People's Republic of China
- ICS
- 13.060.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4331-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard that describes how the coagulation performance of water treatment chemicals is to be evaluated. It specifies the coagulation and flocculation test used to judge a coagulant and the measurement of how well the chemical removes organic matter from water. The methods are meant for determining the coagulation performance of water treatment agents rather than for setting product specifications. The standard sits under the Chinese classification G77 and under ICS 13.060.30 and 19.020. Its procedures rely on GB/T 601, GB/T 602-2002, GB/T 603-2002, GB/T 6682-2008 and GB/T 15456-2008.
HG/T 4331-2012 falls under ICS 13.060.30, in the field of environment and health protection, safety.
This catalogue holds 95 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 601
GB/T 602-2002 — Chemical reagent - Preparations of standard solutions for impurity
GB/T 603-2002 — Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 15456-2008 — Industrial circulating cooling water - Determination of the chemical oxygen demand - Potassium permanganate method
4 Where this standard sits
It cites 5 standards, among them GB/T 602-2002, GB/T 603-2002, GB/T 6682-2008, listed in full above.
One other standard in this catalogue cites it: HG/T 4817-2015.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other editions:
HG/T 4331-2026 (later edition)
Standards on related subjects:
GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water
GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule
GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness
HG/T 4324-2012 — Cleaning solutions - Determination of total iron content
HG/T 4322-2012 — Industrial circulating cooling water - Determination of silicate in fouling and corrosion products
7 Classification and status
International classification (ICS): 13.060.30
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 602-2002Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 603-2002Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- GB/T 15456-2008Determination of the chemical oxygen demand in industrial circulating cooling water - Permanganate index method
Similar standards
How to Download HG/T 4331-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15456-2008 — Industrial circulating cooling water - Determination of the chemical oxygen demand - Potassium permanganate method
GB/T 601-1988 — Chemical reagent--Preparations of standard volumetric solutions
GB/T 601-2002 — Chemical reagent - Preparations of standard volumetric solutions
HG/T 4331-2012
$105.00