Valid

HG/T 4327-2012Reclaimed water - Determination of total iron content - Spectrophotometric method (English PDF)

再生水中总铁含量的测定 分光光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4327-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 7, 2012

Implementation date

March 1, 2013

Scope

HG/T 4327-2012 is the English-translated version of 再生水中总铁含量的测定 分光光度法.

The recommended chemical industry standard HG/T 4327-2012 gives a spectrophotometric method for the total iron content of reclaimed water. The water it addresses is domestic sewage and industrial wastewater that has been reclaimed after suitable treatment, and the method is written for that reclaimed stream.

It is applicable to the determination of iron in the concentration range from 0.01 mg/L to 5 mg/L. Reagents, standard solutions and laboratory water follow GB/T 602-2002, GB/T 603-2002 and GB/T 6682-2008.

Its Chinese classification is G76 and it carries the international classifications 13.060.50 and 71.040.40. Issued on 7 November 2012, it has applied since 1 March 2013.

Found what you need?

Document preview — HG/T 4327-2012

National Standard of the People's Republic of China

ICS
13.060.50

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4327-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

The recommended chemical industry standard HG/T 4327-2012 gives a spectrophotometric method for the total iron content of reclaimed water. The water it addresses is domestic sewage and industrial wastewater that has been reclaimed after suitable treatment, and the method is written for that reclaimed stream. It is applicable to the determination of iron in the concentration range from 0.01 mg/L to 5 mg/L. Reagents, standard solutions and laboratory water follow GB/T 602-2002, GB/T 603-2002 and GB/T 6682-2008. Its Chinese classification is G76 and it carries the international classifications 13.060.50 and 71.040.40.

HG/T 4327-2012 falls under ICS 13.060.50, in the field of environment and health protection, safety.

This catalogue holds 95 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 602-2002 — Chemical reagent - Preparations of standard solutions for impurity

GB/T 603-2002 — Chemical reagent - Preparations of reagent solutions for use in test methods

GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water

GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule

GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness

HG/T 4331-2026 — Determination method for coagulation performance of water treatment cheimcals

HG/T 4324-2012 — Cleaning solutions - Determination of total iron content

HG/T 4322-2012 — Industrial circulating cooling water - Determination of silicate in fouling and corrosion products

6 Classification and status

International classification (ICS): 13.060.50

Chinese Standard Classification (CCS): G 76

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4327-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4327-2012

$85.00