HG/T 4280-2011Welding procedure qualification for plastics (English PDF)
塑料焊接工艺评定
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4280-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4280-2011 is the English-translated version of 塑料焊接工艺评定.
HG/T 4280-2011 is the Chinese standard "Welding procedure qualification for plastics". Its scope clause reads: This standard specifies the terms and definitions, evaluation rules and file format of welding procedure qualification for plastics.
This standard is applicable to the welding procedure qualification for special equipment (pressure vessels and pipelines), atmospheric pressure vessels and pipelines made of plastics and plastic lining.
Note: Vessels herein refer to special pressure vessels or atmospheric pressure vessels that are all-plastic or plastic-lined; pipelines only refer to special pressure pipelines and atmospheric pressure pipelines that are all-plastic.
E.g. Non-metallic pressure vessels (including liner) made of A4 plastic as special pressure vessels; thermoplastics storage tank welded in static and atmospheric pressure as atmospheric pressure vessels; all-plastic A and AX pressure pipeline components as special pressure pipelines.
The plastics applicable to this standard refer to the pipelines and plates made of thermoplastics and plastic alloys, including polyvinyl chloride (PVC, including chlorinated polyvinyl chloride PVC-C, unplasticized polyvinyl chloride PVC-U, and soft polyvinyl chloride PVC-R), polypropylene (PP, including block-copolymer polypropylene PP-B, homo-polymer polypropylene PP-H, and random-copolymer polypropylene PP-R), polyethylene (PE, including high-density polyethylene PE-HD, medium-density polyethylene PE-MD, and low-density polyethylene PE-LD), polyvinylidene fluoride (PVDF), modified polytetrafluoroethylene (PTFE-TFM), acrylonitrile/butadiene/styrene plastics (ABS), polyamide (PA), etc. Its clauses include terms and definitions.
Found what you need?
Document preview — HG/T 4280-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- Introduction ii
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 General qualification principles
- 5 Rules for welding procedure qualification
- 6 Documentation style of welding procedure qualification
- Annex A (Informative) Flow chart of welding procedure qualification for plastics
- Annex B (Informative) Table of categories and groups of plastic welding materials
- Annex C (Normative) Minimum bending angle and minimum extrusion displacement
- Annex D (Informative) Format of WPS for plastics
- Annex E (Informative) Format of PQR for plastics
1 Scope
This standard specifies the terms and definitions, evaluation rules and file format of welding procedure qualification for plastics.
This standard is applicable to the welding procedure qualification for special equipment (pressure vessels and pipelines), atmospheric pressure vessels and pipelines made of plastics and plastic lining.
Note: Vessels herein refer to special pressure vessels or atmospheric pressure vessels that are all-plastic or plastic-lined; pipelines only refer to special pressure pipelines and atmospheric pressure pipelines that are all-plastic. E.g. Non-metallic pressure vessels (including liner) made of A4 plastic as special pressure vessels; thermoplastics storage tank welded in static and atmospheric pressure as atmospheric pressure vessels; all-plastic A and AX pressure pipeline components as special pressure pipelines.
The plastics applicable to this standard refer to the pipelines and plates made of thermoplastics and plastic alloys, including polyvinyl chloride (PVC, including chlorinated polyvinyl chloride PVC-C, unplasticized polyvinyl chloride PVC-U, and soft polyvinyl chloride PVC-R), polypropylene (PP, including block-copolymer polypropylene PP-B, homo-polymer polypropylene PP-H, and random-copolymer polypropylene PP-R), polyethylene (PE, including high-density polyethylene PE-HD, medium-density polyethylene PE-MD, and low-density polyethylene PE-LD), polyvinylidene fluoride (PVDF), modified polytetrafluoroethylene (PTFE-TFM), acrylonitrile/butadiene/styrene plastics (ABS), polyamide (PA), etc.
2 Normative References
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 6111 Thermoplastics pipes for the conveyance of fluids—Resistance to internal pressure—Test method
GB/T 19806 Plastic pipes and fittings—Crushing decohesion test for polythylene (PE) electrofusion assemblies
GB/T 19808 Plastic pipes and fittings—Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
GB/T 19810 Polyethylene (PE) pipes and fittings—Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
HG/T 4281 Welding specification for plastics
HG/T 4282 Test method of tensile for plastics welded test specimen
HG/T 4283 Test method of bending for plastics welded test specimen
TSG D2002-2006 Regulation on welding technology for gas supply polyethylene pipe
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
3.1 welding procedure qualification (WPQ)
the process in which verification test and evaluation are carried out on a proposed welding procedure to judge whether a welded joint is qualified in accordance with the requirements of technical standards
3.2 welding procedure test
the process of preparing and testing standard test pieces and specimens according to pWPS (3.5) for WPQ
3.3 welding procedure qualification record (PQR)
the record, in specified format, of test data and verification test results (including records of welding test pieces, examination specimen, performance determination and validation test), and correctness evaluation of a proposed welding procedure
Note: "welding procedure qualification record" is also called "welding procedure qualification report" (WPQR).
3.4 welding procedure specification (WPS)
the documents, drafted for verification test and qualified after being evaluated, that specifies welding procedure to guide production
Note: "welding procedure specification" is also called "welding procedure instruction".
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download HG/T 4280-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 3066-2025 — Rubber compounding ingredients - Precipitated hydrated silica - Determination of loss on ignition of the dried sample
HG/T 3067-2025 — Rubber compounding ingredients - Precipitated hydrated silica - Determination of pH value of an aqueous suspension
HG/T 6360-2025 — Rubber footwear - Test method for phenolic yellowing of textile materials of athletic shoes
Secure payment via Stripe
Payments accepted
HG/T 4280-2011
$525.00