Valid

HG/T 4265-2011Textile dyeing and finishing auxiliaries - Water and oil repellent agents - Determination of oil repellency (English PDF)

纺织染整助剂 防水防油加工剂 防油性的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4265-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4265-2011 is the English-translated version of 纺织染整助剂 防水防油加工剂 防油性的测定.

HG/T 4265-2011 is the recommended Chinese chemical industry standard giving the method for determining the oil repellency of water and oil repellent agents used as textile dyeing and finishing auxiliaries.

It applies to the testing of oil repellency on auxiliaries of that kind. Specimen conditioning follows GB/T 6529, the water used follows GB/T 6682, and results are expressed according to GB/T 8170-2008.

It was issued by the Ministry of Industry and Information Technology and is grouped with the other auxiliary test methods of the same series, which share its classification under surface active agents. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 4265-2011

National Standard of the People's Republic of China

ICS
71.100.40

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4265-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard giving the method for determining the oil repellency of water and oil repellent agents used as textile dyeing and finishing auxiliaries. It applies to the testing of oil repellency on auxiliaries of that kind. Specimen conditioning follows GB/T 6529, the water used follows GB/T 6682, and results are expressed according to GB/T 8170-2008. It was issued by the Ministry of Industry and Information Technology and is grouped with the other auxiliary test methods of the same series, which share its classification under surface active agents.

HG/T 4265-2011 falls under ICS 71.100.40, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 6529

GB/T 6682

GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values

4 Where this standard sits

It cites 3 standards, among them GB/T 8170-2008, listed in full above.

One other standard in this catalogue cites it: HG/T 4437-2012.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Standards on related subjects:

GB/T 1677-2023 — Determinating the epoxy value of plasticizers

GB/T 1668-2008 — Plasticizers - Determination of acid value and acidity

GB/T 1676-2008 — Determinating the iodine value of plasticizers

HG/T 4264-2022 — Textile dyeing and finishing auxiliaries - Water and oil repellent finishing agents - Determination of water repellency

HG/T 4261-2022 — Textile dyeing and finishing auxiliaries - Levelling agents for polyester - Determination of high-temperature dispersibility

HG/T 4260-2011 — Textile dyeing and finishing auxiliaries - Determination of total amine value of amino silicone oils

7 Classification and status

International classification (ICS): 71.100.40

Chinese Standard Classification (CCS): G 70

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4265-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4265-2011

$105.00