Valid

HG/T 4221-2011Two-component room temperature vulcanizing silicone rubber for mold making (English PDF)

双组份室温硫化有机硅模具胶

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4221-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4221-2011 is the English-translated version of 双组份室温硫化有机硅模具胶.

HG/T 4221-2011 is the Chinese chemical industry standard for two-component silicone rubber that vulcanizes at room temperature and is used to make moulds. It sorts the product into types and fixes the requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.

It covers the addition-cure and condensation-cure mould-making grades, used as moulding materials in building decoration, handicrafts, imitation mahogany furniture, precision casting, high frequency embossing, the copying of artefacts and the production of gypsum board.

Moulds made from them serve in turn to produce articles of polyurethane, unsaturated polyester, epoxy resin, wax, plaster and low melting point alloys. It is applied with GB/T 191-2008, GB/T 528-2009, GB/T 529-2008, GB/T 531.1-2008, GB/T 2794-1995 and HG/T 2198-1991. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 4221-2011

National Standard of the People's Republic of China

ICS
83.080

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 4221-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the Chinese chemical industry standard for two-component silicone rubber that vulcanizes at room temperature and is used to make moulds. It sorts the product into types and fixes the requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. It covers the addition-cure and condensation-cure mould-making grades, used as moulding materials in building decoration, handicrafts, imitation mahogany furniture, precision casting, high frequency embossing, the copying of artefacts and the production of gypsum board. Moulds made from them serve in turn to produce articles of polyurethane, unsaturated polyester, epoxy resin, wax, plaster and low melting point alloys.

HG/T 4221-2011 falls under ICS 83.080, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 191-2008 — Packaging - Pictorial marking for handling of goods

GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

GB/T 529-2008 — Rubber, vulcanized or thermoplastic -- Determination of tear strength (Trouser, angle and crescent test pieces)

GB/T 531.1-2008 — Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)

GB/T 2794-1995 — Determination methods for viscosity of adhesives

HG/T 2198-1991 — General requirements for vulcanized rubber physical test methods

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

QB/T 4878-2015 — Expanded polypropylene for moulding

GB/T 4615-2013 — Poly (vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method

HG/T 2624-1994 — Microporous Styrene Type Weak Basic Anion Exchange Resin D 301-FC

HG/T 6416-2025 — Aromatic polyurethane system for automobile sunroof glass encapsulation

HG/T 6394-2025 — Plastics - Glass fiber reinforced liquid crystalline polymer (LCP) compound

HG/T 6385-2025 — Plastics - Polycarbonate/acrylonitrile-butadiene styrene (PC/ABS) material for power battery module housing

6 Classification and status

International classification (ICS): 83.080

Chinese Standard Classification (CCS): G 32

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4221-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4221-2011

$55.00