Valid

HG/T 4199-2011Inorganic chemical products - Determination of fluoride content - Ion chromatography (English PDF)

无机化工产品中氟含量测定 离子色谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4199-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4199-2011 is the English-translated version of 无机化工产品中氟含量测定 离子色谱法.

HG/T 4199-2011 is the Chinese chemical industry standard for determining fluoride in inorganic chemical products by ion chromatography.

It gives the terms and definitions, the general rules, the principle of the method, the operating principle of the instrument and its flow diagram, the interferences, the reagents and materials, the apparatus, the analytical procedure and the calculation of results.

The method serves for the fluorine content of inorganic chemical products, over a determination range from 0.05 mg/L to 100 mg/L of fluoride expressed as F. Laboratory water follows GB/T 6682-2008, and the general analytical rules of HG/T 3696.2 and HG/T 3696.3 apply.

The Chinese classification is G10. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 4199-2011

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 4199-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the Chinese chemical industry standard for determining fluoride in inorganic chemical products by ion chromatography. It gives the terms and definitions, the general rules, the principle of the method, the operating principle of the instrument and its flow diagram, the interferences, the reagents and materials, the apparatus, the analytical procedure and the calculation of results. The method serves for the fluorine content of inorganic chemical products, over a determination range from 0.05 mg/L to 100 mg/L of fluoride expressed as F. Laboratory water follows GB/T 6682-2008, and the general analytical rules of HG/T 3696.2 and HG/T 3696.3 apply. The Chinese classification is G10.

HG/T 4199-2011 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods

HG/T 3696.2

HG/T 3696.3

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 3051-2025 — General methods for the determination of chloride content in inorganic chemical products — Mercurimetric method and ion chromatography method

HG/T 3696.3-2011 — Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 3: Preparation of reagent solutions and products

GB/T 3050-2000 — Inorganic chemical products for industrial use. General method for determination of chloride content. Potentiometric method

HG/T 3820-2013 — Methods of analysis for synthetic hydrotalcite

HG/T 4320-2012 — Inorganic chemical products - General rules for gas chromatographic analysis

HG/T 3696.1-2011 — Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 1: Preparation of standard volumetric solutions

6 Classification and status

Chinese Standard Classification (CCS): G 10

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4199-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4199-2011

$260.00