HG/T 4082-2009High power high speed planetary gear units - Technical specifications (English PDF)
大功率高速行星齿轮箱技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4082-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 5, 2009
Implementation date
July 1, 2009
Scope
HG/T 4082-2009 is the English-translated version of 大功率高速行星齿轮箱技术条件.
HG/T 4082-2009 is the recommended chemical industry standard that carries the technical specification for high power, high speed planetary gear units. It gives the technical requirements for the design, manufacture, trial running, acceptance, marking, packaging, transport and storage of the gear box.
It applies to involute high speed planetary gear boxes used in metallurgy, mining, aviation, shipbuilding, turbine plant, textiles, chemicals and the food industry, with power below 6000 kW, a sun wheel pitch circle speed of 25 m/s to 70 m/s and a centre height of not more than 600 mm.
Gear, material and component documents such as GB/T 1356, GB/T 3077, GB/T 9239.1, GB/T 10095.1, GB/T 10095.2, JB/T 5000.15 and JB/T 8421 are quoted. Issued on 5 February 2009, it has applied since 1 July 2009.
Found what you need?
Document preview — HG/T 4082-2009
National Standard of the People's Republic of China
- ICS
- 71.120.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4082-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 February 2009 and has been in force since 1 July 2009.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard that carries the technical specification for high power, high speed planetary gear units. It gives the technical requirements for the design, manufacture, trial running, acceptance, marking, packaging, transport and storage of the gear box. It applies to involute high speed planetary gear boxes used in metallurgy, mining, aviation, shipbuilding, turbine plant, textiles, chemicals and the food industry, with power below 6000 kW, a sun wheel pitch circle speed of 25 m/s to 70 m/s and a centre height of not more than 600 mm. Gear, material and component documents such as GB/T 1356, GB/T 3077, GB/T 9239.1, GB/T 10095.1, GB/T 10095.2, JB/T 5000.15 and JB/T 8421 are quoted.
HG/T 4082-2009 falls under ICS 71.120.10, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 699
GB/T 700
GB/T 1031
GB/T 1174
GB/T 1176
GB/T 1184
GB/T 1356
GB/T 1357
GB/T 1568
GB/T 1800.4
GB/T 1801
GB/T 3077
GB/T 6404.1
GB/T 6414
GB/T 8539
GB/T 8542-1987 — Specification for turbine gearings
GB/T 9239.1
GB/T 9439
GB/T 10095.1
GB/T 10095.2
GB 11120
GB/T 11351
GB/T 13306
GB/T 13384
GB/T 15826.1
JB/T 5000.15
JB/T 8421
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 2100-2020 — Mechanical seals for liquid ring chlorine pumps
HG/T 2099-2020 — Test code for mechanical seals of stirred vessels
HG/T 2044-2020 — Plasma-sprayed chromium oxide seal rings for mechanical seals - Technical specifications
6 Classification and status
International classification (ICS): 71.120.10
Chinese Standard Classification (CCS): G 91
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 699Quality carbon structure steels
- GB/T 700Carbon structural steels
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1174Cast bearing alloy
- GB/T 1176Casting copper and copper alloys
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
Similar standards
How to Download HG/T 4082-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11120-1989 — Turbine oils L-TSA
GB 11120-2011 — Lubricating oils for turbines
GB/T 10095.1-2001 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
HG/T 4082-2009
$105.00