Valid

HG/T 4015-2008Chemical reagent - General method for the determination of pH transition ranges of acid-base indicators (English PDF)

化学试剂 酸碱指示剂pH变色域测定通用方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4015-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 23, 2008

Implementation date

October 1, 2008

Scope

HG/T 4015-2008 is the English-translated version of 化学试剂 酸碱指示剂pH变色域测定通用方法.

HG/T 4015-2008 is the recommended Chinese chemical industry standard that gives the general method for determining the pH range over which an acid-base indicator changes colour.

It covers the preparation of the buffer solutions the determination requires, the preparation and the pH of the indicator solutions themselves, and the procedure by which the colour transition range is established.

The method is written for acid-base indicators supplied as chemical reagents, and the individual indicator standards of the same series refer back to it. Only two documents are quoted, GB/T 601 and GB/T 603, both on the preparation of solutions.

It replaces the national standard GB/T 604-2002. Issued on 23 April 2008, it has applied since 1 October 2008.

Found what you need?

Document preview — HG/T 4015-2008

National Standard of the People's Republic of China

ICS
71.040.30

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4015-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 April 2008 and has been in force since 1 October 2008.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard that gives the general method for determining the pH range over which an acid-base indicator changes colour. It covers the preparation of the buffer solutions the determination requires, the preparation and the pH of the indicator solutions themselves, and the procedure by which the colour transition range is established. The method is written for acid-base indicators supplied as chemical reagents, and the individual indicator standards of the same series refer back to it. Only two documents are quoted, GB/T 601 and GB/T 603, both on the preparation of solutions. It replaces the national standard GB/T 604-2002.

HG/T 4015-2008 falls under ICS 71.040.30, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 601-2002 — Chemical reagent - Preparations of standard volumetric solutions

GB/T 603-2002 — Chemical reagent - Preparations of reagent solutions for use in test methods

4 Where this standard sits

It cites 2 standards, among them GB/T 601-2002, GB/T 603-2002, listed in full above.

One other standard in this catalogue cites it: HG/T 3449-2012.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Standards on related subjects:

GB/T 614-2021 — Chemical reagent - General method for the determination of refractive index

GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods

HG/T 3484-1999 — Chemical reagent Standard of clear liquor, made from glass dust, and standard of transparence

HG/T 4850.4-2019 — Stable isotope deuterium labelled reagents - Part 4: Trichlorfon-D6

HG/T 5339-2018 — Stable isotope 15N labelled melamine

HG/T 3580-2018 — Technical specification for reference materials of the petrochemical industry

7 Classification and status

International classification (ICS): 71.040.30

Chinese Standard Classification (CCS): G 62

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4015-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4015-2008

$115.00