Valid

HG/T 3846-2008Ebonite - Determination of hardness (English PDF)

硬质橡胶 硬度的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3846-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

HG/T 3846-2008 is the English-translated version of 硬质橡胶 硬度的测定.

HG/T 3846-2008 is the recommended Chinese chemical industry standard for determining the hardness of ebonite. It describes how the hardness of hard rubber is measured by pressing a ball into the material under a specified load.

It applies to hard rubber of the various grades, including the chemically resistant, heat resistant and impact resistant types. It is a modified adoption of ISO 2039-1-1993 and quotes GB/T 2941.

It replaces the earlier edition HG/T 3846-2006. Issued on 1 February 2008, it has applied since 1 July 2008.

Found what you need?

Document preview — HG/T 3846-2008

National Standard of the People's Republic of China

ICS
83.060
Replacing
HG/T 3846-2006

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 3846-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It replaces the earlier edition HG/T 3846-2006.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard for determining the hardness of ebonite. It describes how the hardness of hard rubber is measured by pressing a ball into the material under a specified load. It applies to hard rubber of the various grades, including the chemically resistant, heat resistant and impact resistant types. It is a modified adoption of ISO 2039-1-1993 and quotes GB/T 2941. It replaces the earlier edition HG/T 3846-2006.

HG/T 3846-2008 falls under ICS 83.060, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 2941

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3846-2006 (earlier edition)

Standards on related subjects:

GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods

GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering

GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method

HG/T 3838-2008 — Rubber - Determination of free sulfur content - Potentiometric titration method

HG/T 3837-2008 — Rubber - Determination of total hydrocarbon content - Pyrolysis method

HG/T 3836-2008 — Vulcanized rubber - Test method for sliding abrasion

6 Classification and status

International classification (ICS): 83.060

Chinese Standard Classification (CCS): G 40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Editions of HG/T 3846

EditionTitleRevisionStatus
HG/T 3846-2008Ebonite - Determination of hardnesscurrent editionCurrent
HG/T 3846-2006Ebonite - Determination of hardnessprevious editionSuperseded

This page sells the current edition, HG/T 3846-2008. Earlier editions are listed for reference only.

How to Download HG/T 3846-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3846-2008

$105.00