HG/T 3841-2006Plastics - Test method for impact properties using small specimens (English PDF)
塑料冲击性能小试样试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3841-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 27, 2006
Implementation date
October 11, 2006
Scope
HG/T 3841-2006 is the English-translated version of 塑料冲击性能小试样试验方法.
Small test specimens are the point of HG/T 3841-2006, a recommended chemical industry standard of China that determines the impact properties of plastics using a Charpy impact testing machine.
The method is set up so that impact strength can be measured on samples too small for the ordinary specimen size. It applies to rigid thermoplastics and to thermosetting plastics, but as a rule it is not suitable for reinforced plastics.
GB/T 1039, GB/T 1043 and GB/T 2918 are quoted and used with it, and the standard is filed under the Chinese classification G31 and the international classifications 83.080.01 and 83.040.01.
It replaces GB/T 16420-1996. Issued on 27 July 2006, it has applied since 11 October 2006.
Found what you need?
Document preview — HG/T 3841-2006
National Standard of the People's Republic of China
- ICS
- 83.080.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 3841-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 27 July 2006 and has been in force since 11 October 2006.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Small test specimens are the point of HG/T 3841-2006, a recommended chemical industry standard of China that determines the impact properties of plastics using a Charpy impact testing machine. The method is set up so that impact strength can be measured on samples too small for the ordinary specimen size. It applies to rigid thermoplastics and to thermosetting plastics, but as a rule it is not suitable for reinforced plastics. GB/T 1039, GB/T 1043 and GB/T 2918 are quoted and used with it, and the standard is filed under the Chinese classification G31 and the international classifications 83.080.01 and 83.040.01. It replaces GB/T 16420-1996.
HG/T 3841-2006 falls under ICS 83.080.01, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1039
GB/T 1043
GB/T 2918
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 3681.1-2021 — Plastics - Methods of exposure to solar radiation - Part 1: General guidance
GB/T 3960-2016 — Plastics—Test method for friction and wear by sliding
GB/T 3682-2000 — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
HG/T 4670-2014 — Determination of black specks and off-colour specks in flame retardants for plastics modification
HG/T 4574-2014 — Polyurethane material-Determination of foam reaction characteristic
HG/T 4453-2012 — Plastics - Technical specification for controlled use of plasticizers
6 Classification and status
International classification (ICS): 83.080.01
Chinese Standard Classification (CCS): G 31
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download HG/T 3841-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1039-1992 — Plastics--General rules for the test method of mechanical properties
GB/T 1043.1-2008 — Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
GB/T 1043-1993 — Plastics Determination of charpy impact strength of rigid materials
HG/T 3841-2006
$85.00