HG/T 3796.2-2005Series of agitator shaft diameters (English PDF)
搅拌轴轴径系列
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3796.2-2005 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 17, 2006
Implementation date
July 1, 2006
Scope
HG/T 3796.2-2005 is the English-translated version of 搅拌轴轴径系列.
HG/T 3796.2-2005 is the Chinese chemical industry standard covering series of agitator shaft diameters. It was issued on 17 January 2006 and has been in force since 1 July 2006, replacing HG 3167-1986.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2005 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — HG/T 3796.2-2005
National Standard of the People's Republic of China
- Replacing
- HG 3167-1986
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 3796.2-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 January 2006 and has been in force since 1 July 2006.
It is one of 23 parts of the HG/T 3796 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
HG/T 3796.2-2005 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,854 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
HG/T 3796.1-2005 — Agitator types and basic parameters
HG/T 3796.1-2006 — Types and basic parameters of agitators
HG/T 3796.3-2005 — Paddle agitators
HG/T 3796.3-2006 — Paddle agitators
HG/T 3796.4-2005 — Open turbine agitators
HG/T 3796.4-2006 — Open turbine agitators
HG/T 3796.5-2005 — Disc turbine agitators
HG/T 3796.5-2006 — Disc turbine agitators
HG/T 3796.6-2005 — Sawtooth disc agitators
HG/T 3796.6-2006 — Disc saw-tooth agitators
HG/T 3796.7-2005 — Three-blade backswept agitators
HG/T 3796.7-2006 — Three-blade backswept agitators
HG/T 3796.8-2005 — Propeller agitators
HG/T 3796.8-2006 — Propeller agitators
HG/T 3796.9-2005 — Plate propeller agitators
HG/T 3796.9-2006 — Plate type propeller agitators
HG/T 3796.10-2005 — Screw agitators
HG/T 3796.10-2006 — Screw agitators
HG/T 3796.11-2005 — Helical ribbon agitators
HG/T 3796.11-2006 — Helical ribbon agitators
HG/T 3796.12-2005 — Anchor-gate agitators
HG/T 3796.12-2006 — Anchor-frame agitators
Other editions:
HG/T 3796.2-2006 (later edition)
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 2100-2020 — Mechanical seals for liquid ring chlorine pumps
HG/T 2099-2020 — Test code for mechanical seals of stirred vessels
HG/T 2044-2020 — Plasma-sprayed chromium oxide seal rings for mechanical seals - Technical specifications
5 Classification and status
Chinese Standard Classification (CCS): G 91
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 3796.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3796.2-2005 | Series of agitator shaft diameters | current edition | Current |
| HG 3167-1986 | Series of agitator shaft diameters | previous edition | Superseded |
This page sells the current edition, HG/T 3796.2-2005. Earlier editions are listed for reference only.
How to Download HG/T 3796.2-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 3796.2-2005
$65.00