Valid

HG/T 3511-2013Penetrating agent JFC (English PDF)

渗透剂JFC

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3511-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 17, 2013

Implementation date

March 1, 2014

Scope

HG/T 3511-2013 is the English-translated version of 渗透剂JFC.

Penetrating agent JFC is the subject of HG/T 3511-2013, a recommended standard of the Chinese chemical industry covering this surface-active product.

The standard describes the appearance of the agent and its technical requirements, and it lays down the sampling, the test methods, the inspection rules and the marking, packaging, transport and storage.

It applies to penetrating agent JFC obtained by condensing aliphatic alcohols, or alkylphenols, with ethylene oxide. The determinations are run against GB/T 5559-2010, GB/T 6368-2008, GB/T 9282.1-2008 and HG/T 2575-1994.

The 1999 edition, HG/T 3511-1999, is withdrawn and replaced by this text. Issued on 17 October 2013, it has applied since 1 March 2014.

Found what you need?

Document preview — HG/T 3511-2013

National Standard of the People's Republic of China

ICS
71.100.40
Replacing
HG/T 3511-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3511-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.

It replaces the earlier edition HG/T 3511-1999.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Penetrating agent JFC is the subject of HG/T 3511-2013, a recommended standard of the Chinese chemical industry covering this surface-active product. The standard describes the appearance of the agent and its technical requirements, and it lays down the sampling, the test methods, the inspection rules and the marking, packaging, transport and storage. It applies to penetrating agent JFC obtained by condensing aliphatic alcohols, or alkylphenols, with ethylene oxide. The determinations are run against GB/T 5559-2010, GB/T 6368-2008, GB/T 9282.1-2008 and HG/T 2575-1994. The 1999 edition, HG/T 3511-1999, is withdrawn and replaced by this text.

HG/T 3511-2013 falls under ICS 71.100.40, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 5559-2010 — Non-ionic surface active agents obtained from ethylene oxide and ethylene oxide/propylene oxide block copolymers -- Determination of cloud point

GB/T 6368-2008 — Surface active agents -- Determination of pH of aqueous solution -- Potentiometric method

GB/T 9282.1-2008 — Clear liquids -- Estimation of colour by the platinum-cobalt scale -- Part 1: Visual method

HG/T 2575-1994 — Surface Active Agents - Determination of Wetting Power - Immersion Method

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3511-1999 (earlier edition)

Standards on related subjects:

GB/T 15045-2013 — Fatty alkyl dimethyl tertiary amines

QB/T 4309-2012 — Rewettability evaluation of fabrics softener

HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate

HG/T 3507-2025 — Sodium lignin sulphonate dispersing agent

HG/T 3512-2014 — Detergent LS

HG/T 3504-2014 — Glass fibre lubricant G

6 Classification and status

International classification (ICS): 71.100.40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Editions of HG/T 3511

EditionTitleRevisionStatus
HG/T 3511-2013Penetrating agent JFCcurrent editionCurrent
HG/T 3511-1999Penetrating agent JFCprevious editionSuperseded

This page sells the current edition, HG/T 3511-2013. Earlier editions are listed for reference only.

How to Download HG/T 3511-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3511-2013

$85.00