Valid

HG/T 3229-2011Platen vulcanizing presses - Testing and measuring methods (English PDF)

平板硫化机检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3229-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 3229-2011 is the English-translated version of 平板硫化机检测方法.

HG/T 3229-2011 is the Chinese chemical industry standard that sets out how platen vulcanizing presses, also known as daylight presses, are tested and measured. It describes the methods used to check the accuracy and the performance of the main platens of the machine, and the safety requirements that go with those checks.

It applies to the testing of flat-plate vulcanizing presses, equipment placed under the Chinese classification G95 and ICS 71.120 and 83.200. The measurements are carried out together with GB/T 25155-2010 and GB 25432-2010.

It supersedes HG/T 3229-1999. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 3229-2011

National Standard of the People's Republic of China

ICS
71.120
Replacing
HG/T 3229-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3229-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

It replaces the earlier edition HG/T 3229-1999, HG/T 3229-1989.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese chemical industry standard that sets out how platen vulcanizing presses, also known as daylight presses, are tested and measured. It describes the methods used to check the accuracy and the performance of the main platens of the machine, and the safety requirements that go with those checks. It applies to the testing of flat-plate vulcanizing presses, equipment placed under the Chinese classification G95 and ICS 71.120 and 83.200. The measurements are carried out together with GB/T 25155-2010 and GB 25432-2010. It supersedes HG/T 3229-1999.

HG/T 3229-2011 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 25155-2010 — Daylight press

GB 25432-2010 — Safety requirements of daylight press

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3229-1999 (earlier edition)

HG/T 3229-1989 (earlier edition)

Standards on related subjects:

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

GB 20055-2006 — Safety requirements of mill for rubber and plastics

HG/T 3227.2-2020 — Moulds for tyre covers - Part 2: Two-piece moulds

HG/T 3227.1-2020 — Moulds for tyre covers - Part 1: Segmented moulds

HG/T 3226.2-2011 — Tyre building drums - Part 2: Expandable and collapsible drums

6 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 95

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3229

EditionTitleRevisionStatus
HG/T 3229-2011Platen vulcanizing presses - Testing and measuring methodscurrent editionCurrent
HG/T 3229-1999Platen vulcanizing presses - Testing and measuring methodsprevious editionSuperseded

This page sells the current edition, HG/T 3229-2011. Earlier editions are listed for reference only.

How to Download HG/T 3229-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3229-2011

$120.00