Valid

HG/T 2781-2018Determination of cobalt and molybdenum content in sulfur-tolerant carbon monoxide shift catalysts (English PDF)

一氧化碳耐硫变换催化剂中钴钼含量的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2781-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2018

Implementation date

September 1, 2018

Scope

HG/T 2781-2018 is the English-translated version of 一氧化碳耐硫变换催化剂中钴钼含量的测定.

HG/T 2781-2018 is the Chinese standard "Determination of cobalt and molybdenum content in sulfur-tolerant carbon monoxide shift catalysts". Its scope clause reads: This standard specifies the method for the determination of cobalt oxide and molybdenum trioxide in a carbon monoxide sulfur-tolerant shift catalyst.

Found what you need?

Document preview — HG/T 2781-2018

National Standard of the People's Republic of China

Replacing
HG/T 2781-2010

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope

1 Scope

This standard specifies the method for the determination of cobalt oxide and molybdenum trioxide in a carbon monoxide sulfur-tolerant shift catalyst.

Foreword

This document was issued on 30 April 2018 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 September 2018.

It replaces HG/T 2781-2010.

The document is under the responsibility of the Ministry of Industry and Information Technology.

About this edition

HG/T 2781-2018 is the current edition. It was issued on 30 April 2018 and has been in force since 1 September 2018, replacing HG/T 2781-2010.

HG/T 2781-2010 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

HG/T 2781-2018 replaces HG/T 2781-2010. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

HG/T 2781-2018 carries no ICS number in the official record.

The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is HG/T 2781-2018. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of HG/T 2781

EditionTitleRevisionStatus
HG/T 2781-2018Determination of cobalt and molybdenum content in sulfur-tolerant carbon monoxide shift catalystscurrent editionCurrent
HG/T 2781-2010Determination of cobalt and molybdenum content in sulfur-tolerant carbon monoxide shift catalystsprevious editionSuperseded

This page sells the current edition, HG/T 2781-2018. Earlier editions are listed for reference only.

How to Download HG/T 2781-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2781-2018

$115.00