HG/T 2581.2-2009Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (English PDF)
橡胶或塑料涂覆织物 耐撕裂性能的测定 第2部分:冲击摆锤法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2581.2-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 2581.2-2009 is the English-translated version of 橡胶或塑料涂覆织物 耐撕裂性能的测定 第2部分:冲击摆锤法.
HG/T 2581.2-2009 is the second part of the Chinese chemical industry series on rubber- or plastics-coated fabrics and sets out the ballistic pendulum method for tear resistance, identical in content to ISO 4674-2-1998.
In this method a sudden force is applied to a notched test piece, and the tear resistance of the sample is characterised from the result. Specimens may be tested after conditioning in the standard atmosphere or after pre-immersion.
Results obtained in this way are not comparable with results from the constant-rate tear method. GB/T 24133 and HG/T 3050.2 are quoted, and the standard was issued by the Ministry of Industry and Information Technology. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 2581.2-2009
National Standard of the People's Republic of China
- ICS
- 59.080.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2581.2-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
It is one of 4 parts of the HG/T 2581 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the second part of the Chinese chemical industry series on rubber- or plastics-coated fabrics and sets out the ballistic pendulum method for tear resistance, identical in content to ISO 4674-2-1998. In this method a sudden force is applied to a notched test piece, and the tear resistance of the sample is characterised from the result. Specimens may be tested after conditioning in the standard atmosphere or after pre-immersion. Results obtained in this way are not comparable with results from the constant-rate tear method. GB/T 24133 and HG/T 3050.2 are quoted, and the standard was issued by the Ministry of Industry and Information Technology.
HG/T 2581.2-2009 falls under ICS 59.080.40, in the field of textile and leather technology.
This catalogue holds 11 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 24133
HG/T 3050.2
4 Where this standard sits
It cites 2 standards, listed in full above.
It is one part of the HG/T 2581 series, of which this catalogue holds 4 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 2581-1994 — Rubber or plastic coated fabric tear resistance
HG/T 2581.1-2009 — Rubber-or plastics-coated fabrics. Determination of tear resistance. Part 1: Constant rate of tear methods
HG/T 2581.1-2022 — Part 1: Constant rate of tear method
Standards on related subjects:
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
HG/T 2582-2022 — Rubber- or plastics-coated fabrics - Determination of resistance to water penetration
HG/T 2580-2022 — Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
7 Classification and status
International classification (ICS): 59.080.40
Chinese Standard Classification (CCS): G 42
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 24133Rubber-or plastics-coated fabrics -- Standard atmospheres for conditioning and testing
- HG/T 3050.2Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
Similar standards
How to Download HG/T 2581.2-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 24133-2009 — Rubber-or plastics-coated fabrics -- Standard atmospheres for conditioning and testing
HG/T 3050.2-2001 — Rubber-or plastics-coated fabrics. Determination of roll characteristics. Part 2: Method for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
HG/T 3050.2-2020 — Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
HG/T 2581.2-2009
$75.00